Advertisement
Quick Links
How to assemble the mold(
Manual
Select the corresponding size)
Step
1: Install the top mold on the fuselage
Note: The indicator rod on the top mold faces the
direction of the handle.
Step
2: Attach mold A to the right end of the base.
Note: The indicator rod on mold A is on the left
side.
Step 3:
Attach mold B to the left end of
the base.
Note: The indicator rod on mold A is on
the right side.
Advertisement
Summary of Contents for Mryitcal DC109
- Page 1 Manual How to assemble the mold( Select the corresponding size) Step 1: Install the top mold on the fuselage Note: The indicator rod on the top mold faces the direction of the handle. Step 2: Attach mold A to the right end of the base. Note: The indicator rod on mold A is on the left side.
- Page 2 How To Make A Button Step 1:Put the metal cover into mold A. Step 2: Put the graph paper into mold A. Step 3: Put a piece of plastic film into mold A. Step 4: Put a plastic washer into mold B. Note: Only the 32mm 58mm...
- Page 3 Step 5: Put a metal pinback into mold B. (The needle is facing downwards) Step 6: Rotate mold A so that it aligns with the top mold. Press down on the upper handle to crimp the front materials. Note: When crimping for the first time, the pegs of the top mold should not go into the holes.
Need help?
Do you have a question about the DC109 and is the answer not in the manual?
Questions and answers