Table of Contents
Advertisement
Grass Trimmer
Operator's Manual
MODELS
Read rules for safe operation and instructions carefully. ECHO provides an Operator's
Manual and a Safety Manual. Both must be read and understood for proper and safe
operation.
X7532270904
GT-2000 TYPE 1E
Serial Number 001001 & Up
GT-2400 TYPE 1E
Serial Number 001001 & Up Commercial Use
WARNING
Occasional Use
DANGER
89869544434
03/01
Advertisement
Table of Contents
Related Manuals for Echo GT-2400
Summarization of Contents
Model Identification and Safety Warnings
Model Overview (GT-2000/GT-2400)
Identifies the specific ECHO grass trimmer models covered in this manual.
Critical Safety Warnings
Highlights essential safety warnings regarding hot mufflers and California emissions.
Introduction to ECHO Trimmers
Manual Purpose and Content
Explains the scope and content of the Operator's and Safety Manuals.
Understanding Safety Information
Safety Alert Symbols Explained
Defines key safety symbols like WARNING, DANGER, IMPORTANT, and NOTE.
Safety Decal Locations
Guides users on locating and understanding safety decals on the trimmer unit.
Equipment Checks and Symbols
International Symbols Guide
Explains various standardized symbols used on the product and in the manual.
Pre-Operation Equipment Inspection
Details essential checks of the trimmer's components before operation.
Fuel and Personal Safety Precautions
Safe Fuel Handling and Refueling
Covers fuel flammability, mixing, and safe refueling practices.
Operator Fitness and Gear
Emphasizes operator's physical/mental state and essential safety gear.
Operator Safety and Protective Equipment
Operator Physical and Mental Readiness
Discusses condition requirements and avoiding fatigue or impairment.
Required Protective Gear
Details eye, hand, hearing protection and proper clothing requirements.
Hot Humid Weather Safety
Provides advice for operating safely in hot and humid conditions.
Safe Operation Guidelines
Operation Area Safety
Ensures safe trimming zones and protection for bystanders.
Grip, Stance, and Surface Awareness
Details proper handling techniques and avoiding hazards.
Managing Operation Risks
Vibration and Cold Exposure Effects
Information on Raynaud's Phenomenon and preventative measures.
Repetitive Stress Injury (RSI) Prevention
Strategies to avoid hand, wrist, and arm injuries during use.
Product Description and Contents
Initial Unit Inspection
Checking for damage after unpacking and performing basic assembly.
Emission Control System Details
Information on the engine modification and its emissions label.
Included Items List
Enumerates all parts provided in the trimmer package.
Component Identification and Function
Manuals and Handles
Describes the included manuals, power head, and operator handles.
Cutting Head and Controls
Details the cutter head, debris shield, throttle, and stop switch.
Engine and Fuel System Parts
Describes key engine components like muffler, fuel tank, starter, and primer.
Technical Specifications
Model Comparison (GT-2000 vs. GT-2400)
Provides detailed technical data comparing the GT-2000 and GT-2400 models.
Assembly Instructions
Shield and Cutting Head Assembly
Steps for attaching the plastic shield and the nylon line cutting head.
Handle and Harness Adjustment
Instructions for positioning the front handle and attaching the shoulder harness.
Pre-Operation Fuel Management
Fuel Type and Mixing Ratios
Specifies the required gasoline octane and two-stroke oil mixing ratios.
Fuel Mixing Procedure
Provides step-by-step instructions for safely mixing fuel and oil.
Fuel Storage and Handling After Use
Post-Refueling Actions
Covers wiping spills and moving away from refueling location before starting.
Unit and Fuel Storage Guidelines
Provides proper procedures for storing the unit and any leftover fuel.
Pre-Use Checks and Area Assessment
Essential Equipment Checklist
Final checks of all trimmer components and safety features before operation.
Operation Area Hazard Review
Identifying and mitigating risks in the trimming zone for safe operation.
Starting a Cold Engine
Cold Start Procedure Steps
Detailed sequence for starting the engine when it is cold.
Engine Operation and Shutdown
Starting a Warm Engine
Method for starting the engine when it is already warm.
Engine Stopping Procedure
Steps to safely turn off the engine.
Maintenance Requirements
Maintenance Skill Level Guide
Classifies maintenance tasks by difficulty level for user guidance.
Scheduled Maintenance Intervals
Chart detailing maintenance frequency for various components.
Air and Fuel Filter Maintenance
Air Filter Service Procedure
Instructions for cleaning or replacing the air filter.
Fuel Filter Replacement Guide
Steps for safely changing the fuel filter.
Ignition and Cooling System Care
Spark Plug Check and Replacement
Procedures for spark plug maintenance, cleaning, and gapping.
Cooling Fin and Intake Cleaning
How to keep the engine cooling fins and air intakes clear.
Exhaust System Maintenance
Spark Arrestor Screen Cleaning
Steps to clean or replace the spark arrestor screen in the muffler.
Carburetor Adjustment (Emission Models)
Tuning Emission-Controlled Carburetors
Detailed process for adjusting carburetors on emission models.
Carburetor Adjustment (Non-Emission Models)
Tuning Non-Emission Carburetors
Procedures for basic and fine-tuning non-emission model carburetors.
Lubrication and GT-2000 Line Replacement
Drive Shaft Lubrication Procedure
Steps for lubricating the drive shaft housing.
GT-2000 Nylon Line Loading
Instructions for replacing the nylon line on the GT-2000 model.
GT-2400 Nylon Line Replacement
GT-2400 Line Loading Steps
Procedure for loading nylon line onto the GT-2400 spool.
GT-2400 Line Installation
GT-2400 Spool and Final Setup
Completing the nylon line installation for the GT-2400 model.
Troubleshooting Common Issues
Engine Starting and Running Problems
Diagnosing and resolving engine performance issues like hard starts or poor running.
Long Term Storage Preparation
Protective Storage Maintenance Steps
Procedures for preparing the trimmer for extended periods of storage.
Servicing and Support Resources
Parts, Service, and Support Contacts
Information on obtaining parts, authorized service, and consumer support.
Warranty and Manuals Availability
Details on warranty registration and obtaining additional manuals.
Need help?
Do you have a question about the GT-2400 and is the answer not in the manual?
Questions and answers