MIND READER WDMTCART3T-BLK Manual

1
do not tighten firmly.Place the lock washer(3) on the screw followed by
the washer, the washer must be next to the wood.
4
Use only the hex
wrench(4) provide. Do not use power tools.Power tools can overtighten
screws and strip threads
2
,but
but do not tighten firmly.Place the lock washer(3) on the screw followed
by the washer, the washer must be next to the wood.
Inserting the shelves accordingly.
3. Place the cart upright and make sure
bottom four corners are on same level, if
there is wobble, adjust the frame for levelness,
then fasten all bolts firmly from bottom to top.
WARNING
Do not let any sharp objects touch or rub the surface of the product.
When assembling, do not let children play around the working area.
Please confirm all parts are correct before starting the assembly process.
Do not tighten all bolts and screws completely until the entire unit has been
assembled and set up.
Use only the hex wrench provided( ).DO NOT USE POWER TOOLS.
Power tools can overtighten screws and strip threads.