Download Print this page

Icy Dock FLEX-FIT Duo Manual

Ultra slim odd bay + 3.5" to 5.25" front bay bracket adapter

Advertisement

Quick Links

FLEX-FIT Duo
Ultra Slim ODD Bay + 3.5" to 5.25" Front Bay Bracket Adapter
Copyright © ICY DOCK International. All Rights Reserved. 650240 VER 1.0
1
Package Contents
del paquete
Device
6 Pin Slimline SATA to
15 Pin SATA Power Cable
2
3.5" Device Installation
Installation du dispositif 3.5"
3.5" デバイス取付手順
NOTE: Ultra Slim ODD, 3.5 " HDD & 3.5" device must be installed
before mounting the FLEX-FIT Duo on to the computer case.
By using both thumbs, press against the locking mechanism with a protruding dot, as shown
picture. Next, keep the pressure on your thumbs while sliding the 3.5" device in.
your thumbs, make sure the protruding dot fits into the second screw holes on the sides
of the 3.5" device, as shown in the picture.
hold
3.5" device
(Optional) Two M3*6 black screws can be installed into the front screw holes located on both sides
of the device for extra stability.
3
3.5" HDD Installation
disque dur 3.5"
estado sólido de 3,5"
3.5寸硬盘安装步骤
3-1. Break off the dust cover from the middle of bracket and set it aside.
Dust cover
3-2.
When installing 3.5" HDD, the locking mechanism cannot be used. Please use two #6-32*6
screws to mount the 3.5" HDD either on bottom (Option 1) or both sides (Option 2) of the bracket
as shown in the picture below.
2 x screws on bottom
2 x screws on both sides
3-3. When installing 3.5" HDD or if no 3.5" device is installed, insert the dust cover into opening slot
as the front for protection from dust and for aesthetic purpose.
Dust cover
4
Ultra Slim ODD Installation
Installation de lecteur de disque optique ultrafin
Installation de lecteur Ultra Slim ODD
取付手順
4-1
When installing Ultra Slim ODD. Please use the M2*4 screws to mount the Ultra Slim ODD
as shown in the picture.
(Optional) When no Ultra Slim ODD is installed, insert the dust cover into opening slot as the
front for protection from dust and for aesthetic purpose.
1. Break off the dust panel from the
back and set it aside
ICY DOCK no asumirá ninguna responsabilidad por ningún software, hardware o dato o almacenado dentro
de los productos ICY DOCK o que interactúan con estos que dé lugar daños o errores. ICY DOCK solamente
se hará responsable de las reparaciones y servicios de los productos ICY DOCK.
本商品の誤った使用方法によって他の機器に故障などが発生した場合、弊社は本商品だけを修理する責任を負います。
他の機器の損害に対しては一切の責任を負いません。
Packungsinhalt
User manual
3 x M2*4 screw for Ultra Slim ODD
(2 x screw for spare parts)
WARNING: Please use the included screws to secure the drive(s).
Installation eines 3,5" Gerätes
Protruding dot
Installation einer 3,5" HDD
Instalación de unidad de disco duro o unidad de
3.5" HDD取付手順
1
Option 1
Option 2
2
薄型光碟機安裝步驟
REMARQUES
Contenu
包裝說明
包装说明
4 x M3*6 screw for device
Instalación del dispositivo de 3,5"
3.5吋裝置安裝步驟
release
1
2
Optisches UltraSlim Laufwerk installieren
スリムタイプODDデバイスの
9.5mm笔记本光驱安装步骤
2. Insert the dust panel into opening slot
NOTA
Contenido
2 x M3*6 black screw
for 3.5" device
2 x #6-32*6 screw for 3.5" HDD
(2 x screw for spare parts)
3.5寸设备安装步骤
Before releasing
Installation du
3.5吋硬碟安裝步驟
注釋
in the

Advertisement

loading
Need help?

Need help?

Do you have a question about the FLEX-FIT Duo and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Mb343spo