WUIPET QQ022 Manual

Lock & Unlock
How to unlock
Press and hold "
How to lock
Press and hold "
Warm Tips:In order to prevent touching by accident, the feeder will lock its buttons after 30 seconds of no operation.
When the feeder is locked , long press "
Military Time Conversion Chart
12-hour clock
00:00
(Midnight)
01:00 AM
02:00 AM
03:00 AM
04:00 AM
05:00 AM
06:00 AM
07:00 AM
08:00 AM
09:00 AM
10:00 AM
11:00 AM
12:00 AM
(noon)
PROGRAM SETTING
STEP 1 - Set Current Time
STEP 1.1
In unlocked state, long press "
3 seconds to enter setting mode.
(pay attention to the 24-hour format)
TIP: Please note the conversion between 24hour format and 12-hour format
Example: 9:00AM = 9:00; 10:00pm = 22:00 More details on Page 10.
STEP 1.2
Set current hour time:
· Press " / " button to set the hour.
· You can long press "
· Press " " button to confirm the hour. Then the minute
starts to flash.
PROGRAM SETTING
STEP 2 - Meals, Time & Portions Setting
NOTES:
· Reference for portion setting on Page 6-8.
· The first few portions may vary and it doesn't mean faulty equipment. After about 6 feeds,
it should be almost even.
STEP 2.1
Set the feeding time of Meal 1
·
Press the " / " button to set the
hour. Press the " " button to save.
The minute digits flash,
·
Press the " / " button to set the
minute. Press the "
PROGRAM SETTING
STEP 3 - Feeding Voice Recording
NOTES:
· The feeder supports pre-recording a maximum of 10 seconds of audio.The closer to the
microphone, the louder voice can be recorded.
You can preview the recorded audio by pressing "
· In unlocked state, press and hold "
feeder makes a "beep" sound, and you can start recording near the microphone
position.
· After the recording is completed, release the button. the feeder will make "beep
beep" sound.
· If you need to change the recording, please repeat the above steps.
· The feeder will play the voice recording 3 times when the scheduled feeding tarts.
· For manual feeding, it will only play 1 time.
How to Reset the Feeder?
If you want to delete all previous settings, you can reset the feeder to default
settings. In the Unlocked State, press and hold "
Manual Feeding
When the feeder is unlocked state, press "
The number next to icon always indicates the portions of the last feeding.
Still don't know how to set
Visit the YouTube channel "WUIPET" or Scan QR codes below for the feeder operation video.
" button 3 seconds to unlock, the operation interface is unlocked.
" button 3 seconds to lock, the operation interface is locked.
00:00
(Beginning of the day)
01:00
02:00
03:00
04:00
05:00
06:00
07:00
08:00
09:00
10:00
11:00
12:00
" button for
/ " button for fast setting.
STEP 2.2
Set the portion of Meal 1
Once the meal 1 time is set, the
portion number will flash.
Press the "
portion (MAX 20), press the "
button to save.
" button to save.
" button for 3 seconds until the
3S
3S
" button for 3 seconds to unlock.
24 hours clock comparison chart
STEP 1.3
Set current hour time:
· Press "
· Press "
/ " button to set the
" button.
" button for 5 seconds.
" button for 1 time to start manual feeding
01:00 PM
02:00 PM
03:00 PM
04:00 PM
05:00 PM
06:00 PM
07:00 PM
08:00 PM
09:00 PM
10:00 PM
11:00 PM
12:00 PM
(Midnight)
/ " button to set the minute.
" button to save the feeder's clock time.
STEP 2.3
Set the other meals
Repeat the steps above to set the time
and portion of other meals if needed.
The feeder supports up 6 meals per day.
" If you want to skip some meals, you can
long press "
configure mode after completing
program setting.
1
2
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
23:00
24:00
(End of the day)
3
3S
4
" button for 3s to exit
5
6