Way Basics BLOX CUBE Manual

BLOX CUBE
Included
16 Pins 2 Vertical zBoards
6 holes for pins
1 Backer Board 2 Horizontal zBoards
4 holes for pins
WARNING: CHOCKING HAZARD
Small parts NOT for children under 3 years
Contact Us www.waybasics.com/contact
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
Carefully remove the 3M
1
protective layer from adhesive.
4
Align horizontal zBoard and press
firmly to secure unit together.
• Do not place unit on its side or back as it will compromise it's structural intergrity
• Indoor use only. Not in bathroom
Place alignment pins in
2
vertical zBoards and backboard.
5
When moving the unit, first empty
contents. Lift the cube from the bottom
zBoard to keep adhesives intact.
Start assembly from bottom to top.
3
Align vertical zBoards and backboard
to holes in the horizontal zBoard.
6
The Blox Storage Cube can be stacked
for your custom configuration.
Enjoy building possibilities!
version 1220