Household Essentials Glidez with Quikfit C29537-1 Mounting Instructions

MOUNTING INSTRUCTIONS FOR SLIDING ORGANIZERS:
Single-Tier, 2-Tier, Extra Deep, Under Sink, & Waste Can Organizers
Single-Tier 2-Tier
STEP 1
Place organizer in cabinet in the desired
location. Make sure slides are flush with
the front and back of organizer basket.
STEP 4
Position organizer back
into cabinet. Use provided
screws to secure glides into
pre-drilled holes.
Make sure the organizer
slides in and out freely.
NOTE FOR C21217,
C21417, C26512,
C20521-1 &
C20721-1
Top and lower baskets
come nested on top of
one another. To attach
place vertical chrome
rods into slots on lower
baskets and mount top
basket to vertical rods.
©2015 Household Essentials®
Hazelwood, MO 63042
www.householdessential.com
1-800-922-5524 314-428-5657
•
Under Sink
STEP 2
For Single, 2-Tier, Under Sink &
Extra Deep Organizers: Mark the
location of the holes in Feet.
Align
Flush
Slide basket forward to gain better access to brackets & hardware. If basket catches on cabinet lip,
place a metal washer or small thin strip of wood or plastic under front brackets to elevate runner glides.
NOTE FOR C29537, C29551,
Insert wire frame sections for
wastebasket into slots on base.
Place wastebasket into wire frame.
Waste Can
For Waste Can Organizers:
Mark the location of the
holes in U-Bars or Feet.
FEET
Single, 2-Tier,
Under Sink &
Extra Deep
NOTE FOR C26512
UNDER SINK CABINET ORGANIZERS:
Unit can be reversed–so it can be placed in right or left side
of cabinet. To reverse unit: Use a screwdriver to loosen and
remove the screws that attach the wire basket clips to the
glides. Turn unit. Reattach wire clips to glides with screws.
TOOLS REQUIRED:
Phillips head screwdriver & drill.
Wrench may be needed for C26512.
STEP 3
Remove organizer from
cabinet and drill pilot holes
at marked locations in
cabinet.
U-BAR
Waste Cans
C21247-1
™
™
Basket Clips