Dungoo B08LKMF331 Installation Instructions

INSTALLATION INSTRUCTIONS
Installation Instructions
TABLE LAMP
TABLE LAMP
1. Put the bottom ring on the table,then attach 3/4 white
lampshade around the bottom ring.
2. Attach the top ring to the upper lampshade and the
rest 1/4 lampshade to the bottom ring.Then fix the
place where the lampshade is joined end to end.
3.Squeeze "HARP" together and insert into "SADDLE".
4. Install Bulb (NOT Included) onto the
"LAMPHOLDER" according to the wattage label.
5. Place "SHADE" onto "HARP" and Tighten "SHADE"
by "FINIAL"
TIP: You can grasp the "FINIAL" and "FASTENER" together to
adjust the "SHADE" to correct position if it is skew.
"FASTENER" is slightly rotatable by external force.
CAUTION - Refer to the wattage caution label located
near the lampholder for recommended maximum
wattage-do not exceed recommended wattage.
WARNING - Do not attempt to replace the bulb while
the lamp is plugged into a wall receptacle.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug
(One blade is widerthan the other) .
as a safety feature to reduce the risk of
theelectric shock.This plug will fit in. a
polarized outlet only oneway. If the plug
does not fit in the outlet, reverse . the plug.If it still
does not fit, consult a qualified electrician. Never
useanextension cord unless the plug can be fully
inserted.Do not alter the plug.
★ Keep this instruction for future reference. MADE IN CHINA
FINIAL
SHADE
FASTENER
HARP
LAMPHOLDER
SADDLE
BASE
PLUG