Fala IOT S22D Troubleshooting Manual

Troubleshooting Guide
Product Series
Error Codes
Err 01
Err 04
Err 05
Err 06
Err 07
Err 12
——
Momentary
value is -45℃
Attention:
If the display is still abnormal after troubleshooting the above code,
please contact FALA IOT Customer Service Team for resolution.
Cause
Network
module startup
exception
Router
connection
abnormality
Server
connection
failure
Network
module startup
exception
Sensor Probe Failure.
Check if there is any wire wrapped around the probe.
S22D
Solution
1. Check the battery health status.
2. Remove the battery, wait for 1-2
minutes, then reinstall it.
1. Check if the device is connected
to the network and try reconnecting
it.
Check if the router is functioning
properly or if there are not too
many devices connected to it. You
can try replacing the router.
1. Check router for smooth Internet.
2. Confirm no device restrictions on
router.
3. Consider upgrading router for
better performance if overloaded.
1. Check the battery health status.
2. Remove the battery, wait for 1-2
minutes, then reinstall it.