TIMBER RIDGE FC630-68053XL Instructions For Use

PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE USING THE LOUNGER!
Figure 1
Use one foot to hold down
the front chair leg.
STEP 1
Ensure the locking levers on both sides are pointing
back,in unlock position.
Stand behind chair and hold upright. Place one
hand on top of the armrest, and the other hand on
top of backrest.
Figure 4
Pull out side table from under the chair ,rotate, and lock securely on front leg
pin.Store table in reverse sequence. See Figure 4
CAUTION
INSTRUCTIONS FOR USE
IMPORTANT!
Figure 2
Pull chair back towards
you while pushing down
on armrest
STEP 2
Open the chair fully from the side. If opening from the back,
then push the chair open and watch your toes.
INSTRUCTIONS FOR USE
6. Make sure that the levers are unlocked before
openning the lounger.To change position or sit up,
unlock the levers first, and then change position.
Re-lock the levers when you have found the position
you desire
Figure 3
Unlock levers prior to
changing positions.Re-lock
levers when you have found
a comfortable position.
LOCK
STEP 3
Lay back relaxed and legs on the footpad.
Give a gentle kick down to initiate the Zero
Gravity experience, and you will start to recline.
USE AND CARE
LOCK