Way Basics 819767011521 Manual

MONITOR STAND
Included
10 Pins 1 Horizontal zBoard
2 Back zBoards 2 Side zBoards
adhesive strips on 2 edges adhesive strips on 2 edges
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
Important
DO NOT place unit on its side or back as
it will compromise its structural integrity.
Watch and Assemble www.waybasics.com/help-monitor-stand
• Assemble your unit on a flat even surface, carpet not recommended
• Furniture is for indoor use only
1
Carefully remove the 3M protective layer,
insert alignment pin to connect back
and side zBoards.
3
Connect the horizonal zBoard with the
assembled back and side zBoards.
Help and Comments www.waybasics.com/contact
• When moving your Way Basics furniture, lift from the bottom
• Make sure zBoard surfaces are clean and dry
2
Carefully remove the rest of the 3M protective layers.
Place alignment pins in vertical zBoards.
4
Easy, done! Maximum weight capacity 30 pounds.
Visit links below for more details.
Enjoy building possibilities!
Share and Win www.waybasics.com/share