SR SUN RISE SRSH-BFMB Installation Manual

for Two Handle Widespread Faucet
1. Shut off water supplies.
Remove the old faucet.
3. Slide cold end valves with gaskets
through sink mounting hole on the left.
Secure end valve with washers
and threaded bracket on shank.
Lock bracket by tightening screws.
Note: handle with BLUE index is for Cold
water and RED index is for Hot water.
5. Connect the inlets tubes with supply lines,
connect to the valves and turn them on.
INSTALLATION MANUAL
Tools you will need
Contact US: mikechen@eyakult.com (USA)
2. Place spout with gasket through
mounting hole in sink. Secure
spout with gasket and nut.
4. Proceed the same steps on the
left for HOT WATER SIIDE.
Align connection as shown and
push quick connects firmly upward.
Pull down moderately to ensure
each connection has been made.
6. Remove aerator, turn faucet on
and let the water run for one
minute to flush any debris.
zhongly@eyakult.com (Canada)