Suplik B095VLWLGG First-Time Setup

Tablet Shockproof Case with
Built-in Screen Protector
First Time Setup
Step 1
Gently pull the screen protector unit out of the
rubberized body of the case. This will require a
little force to first pop the screen protector free
from the rubber.
Step 2
Discard the black mold piece and peel
the protective film off the back of the
screen protector.
Step 3
Carefully affix the screen protector unit to the front
of your tablet. Make sure that the home button is
lined up with the opening in the screen protector
unit. The unit will audibly snap into place when
properly attached.
Step 4
Insert the tablet, with the screen protector
attached, into the rubberized body of the case.
It is easiest to start by sliding in the side of the
tablet first. Make sure the buttons and speakers
are lined up with the correct openings.
Step 5
Firmly press your tablet into the body of the
case. You will need to fix some of the edges
to make sure the rubber sides are wrapped
over the front of the screen protector unit.
This will ensure your tablet stays secure in
its protective cover.
Step 6
Congratulations! You may now enjoy
your tablet with the confidence that it is
safe and protected! Be sure to peel off the
front screen's protective film before use.