MAXPEEDINGRODS Q96 Troubleshooting Manual

01
DVR camera input
USB1 charging
04
07 GPS
10
Video input (Not included in the package)
01 DVR camera input
DVR camera (Not included)
USB1 charging
04
USB cable
COMMON TROUBLESHOOTING GUIDE
Issues
No sound
Media not supported
Poor radio reception
Phone Link will Not Start
Bluetooth®
GPS
Backup camera
CABLE CONNECTION
07 03 04 05 06
08 01
02
05
08
02 Power amplifier
07
Cause
lnternal amplifier is off
Product is muted
External amplifiers
Audio source
External amplifiers
Media on USB flash drive
Radio area
Antenna
Bad Lightning R/USB cable
Locked device
Not charged
Phone Link Frozen
Bad signal
Not connecting to device
GPS Area
Do not support original camera
09
02
Power amplifier
USB2 charging
FM/AM Antenna jack
RCA cable
GPS
GPS cable
Go to Settings > Audio > Internal Amp ON
Touch the volume.
Check the external amplifiers are on.
Check the remote output wire has voltage.
Change the audio source.
Connect 12V ACC wire to the power amplifier wire.
Change the media format on the USB device.
Change the USB device.
Change the station.
Antenna output wire is not connected.
Connect Antenna to product.
Replace the cable.
Device needs to be unlocked.
Device needs to be powered ON for CarPlay/Android
Auto to function. Allow it to charge and power on.
Unplug the device, close all Apps and plug it inagain.
Connect back camera cable to enhance the signal,
We made two signal receive line with back camera.
Make sure the device is within range.
Device's Bluetooth connection needs to be turned ON.
Go to Setting > Connection > Power ON
Pair and Connect the device like new.
Place GPS under the windowshield.
Find a after market camera to connect.
10
11
03
Rear camera input
Protocol interface
06
09 Cooling Fan
11 Wire harness connector
03 Rear camera input
Backcamera cable
Wi-Fi & Bluttooth® enhance cable
11 Wire harness connector
Power cable
Solution