eHemco CSCI CFV0092 Assembly Instructions

Read instructions carefully. Remove all wrapping material, staples and packing straps from the carton. Check Hardware
and Furniture Parts. Be sure you have all parts before you start assembling. Place all wooden furniture parts on a clean
and flat soft surface, such as carpet or rug to prevent from being scratched.
CAUTIONS: (1) DO NOT
ASSEMBLED READY.
(TO AVOID CAUSING DAMAGES TO THE THREAD, DO NOT OVER-TIGHTEN THE WOOD
SCREWS.)
(2) KEEP ALL HARDWARE PARTS OUT OF CHILDREN.
PART LIST
NO
A LEG (LEFT)
B LEG (RIGHT)
C SEAT
D SHORT CROSSBAR
MEDIUM CROSSBAR
E
LONG CROSSBAR
F
HARDWARE LIST
NO
G
H
Step 1:
Apply glue (H) into the circled holes of leg (A), and
leg (B) as shown. Connect tenon of short crossbar
(D) and medium crossbar (E) to leg (A) and leg (B).
A
B
D
E
Step 3: Apply glue (H) into the holes of the seat (C).
Connect the tenon of leg (A) and leg (B) to seat (C).
C
In case you need any extra parts, please feel free to contact us directly instead of returning your order. Feel free to email
service@ehemco.com or call 847-2899955 and we will be more than happy to help you within a business day.
CSCI ASSEMBLY INSTRUCTIONS
FOR CFV0092/ CFV0093 Saddle Stool
FULLY-TIGHTEN THE WOOD SCREWS INITIALLY UNTIL ALL THE WOOD PARTS
COMPONENT
DESCRIPTION
WOOD SCREW
GLUE Glue
B
A
D
E
B
A
QTY
2
*" WAIT UNTIL GLUE IS DRY ".
At least ( 24 hours )
2
Your chair is ready for use.
1
2
REMARK
2
1.) Please tighten screws
2
periodically
2.) Check tightness of all
QTY
screw every 6-8 weeks.
16
1
Step 2:
Apply glue (H) for stronger connection between
long crossbar (F) to leg frame of step 1.
X4
H
Step 4:
Using wood screws (G) for available holes on these
rails. Tighten with a phillips head screw driver (not
included).
G
X4
H
Version : Feb 23, 2023
COMPLETE ASSEMBLY
F
F
F
X12
G
X4
H
X4