Fayleeko B07P8M7N9F Manual

Mode 1: elapsed time in minutes and seconds or hours and minutes, current power (watts) being
used, and cost based on the time indicated on the display, the number of kilowatt hours used
during that time, and the cost per kilowatt hour
Mode 2: elapsed time in minutes and seconds or hours and minutes, kilowatt hours used based
on the elapsed time, and elapsed time in days
Mode 3: elapsed time in minutes and seconds or hours and minutes, voltage (volts), and
frequency (Hz)
Mode 4: elapsed time in minutes and seconds or hours and minutes, current (amps), and power
factor (in electrical engineering, the power factor of an AC electrical power system is defined as
the ratio of the real power used to the apparent power supplied to the circuit. A power factor of
less than one means that the voltage and current waveforms are not in phase)
Mode 5: elapsed time in minutes and seconds or hours and minutes, and minimum power (watts)
Mode 6: elapsed time in minutes and seconds or hours and minutes, and maximum power
(watts)
Mode 7: elapsed time in minutes and seconds or hours and minutes, and cost per kilowatt hour
(one can set this cost value which is unit-less; for example: If one enters .1, that could mean 10
cents or one tenth of a Euro; it depends on the currency one is using)