MoesGo E12 Troubleshooting

How to reconnect the E12 bulb
. Enable the IPv internet connection, instructions can be found here
. Ensure your phone is connected to a stable
. Restart your smartphone
. Disconnect power to the E
. The bulb enters f lash mode and is ready for pairing
How do I f ix a light bulb that drops out frequently?
Generally there are two reasons for frequent disconnection:
. Exceeding the connection limit of the router, ordinary routers generally support
Phenomenon: the router carries more than the upper limit, the bulb will often disconnect, but after the power
failure can reconnect to the network, but the bulb has not been able to stably connect to the network.
Solution: Increase or replace the router to form a better network cap.
. The WIFI signal received by the light bulb is too weak, and there are multiple walls that will diminish the signal.
Phenomenon: The distance between the router and the light bulb is far, and there are multiple walls blocking, the
WIFI signal received by the cell phone at the location is only or
Solution: Add a WIFI repeater to amplify the WIFI signal.
TROUBLESHOOTING
and clear the cache of the MOES app.
bulb and reboot.
GHz Wi-Fi network and has internet access during setup.
frames.
- devices as the upper limit.