Dynacord DSP 260 - SOFTWARE V1.4.0 Manual

Download this manual

DSP 260 Software V1.4.0

Welcome to software version 1.4.0 for the DSP 260 editor software and firmware. This document contains important

information and updates regarding the installation and use of V1.4.0 software.

CAUTION:

For existing users of DSP 260 hardware and software please back up and store any existing settings or

User Presets to your PC. During the process of updating the firmware in the unit to V1.4.0, all existing

User Presets and settings are erased. After the update, the stored settings may be transferred to, and

stored in, the hardware.

To back up settings to your PC, do the following:

Connect the DSP 260 hardware to the PC

Launch the DSP 260 Editor Software

When asked in which direction to sync the information, read the data into the PC.

Click File > Save As and select a location on your hard disc to save the files to.

Recall any User Presets as needed and repeat the process.

After storing your data, you may proceed with the software and firmware update.

The following are the System Requirements for installing and running the DSP 260 Editor Software.

• PC* with Pentium IV 1.2 GHz or equivalent processor (1.6 GHz or better is recommended)

• Microsoft Windows XP Service Pack 2 or Vista (32-bit Only)

• Microsoft .Net 2.0 Framework

• 256 MB RAM

• Hard disk with 250 MB of storage available

• VGA Monitor (1024x768)

• Graphics card, High Color (16-bit)

• Mouse

• Keyboard

• One USB port

HINT: *PC refers to Personal Computers running the specified Windows Operating Systems. Intel-based Apple

computers are only supported when running the specified Windows OS natively under Boot Camp. Virtual-

ization, such as that offered by VMware or Parallels, is not officially supported.

The following is a list of new features or enhancements that can be found in DSP 260 Editor V1.4.0

• Parameter download time from the Editor to the device is reduced

• Front panel lock will lock all the setup menu screens except the lock screen

• Fixed minor display bugs

4 Installing V1.4.0 Software and Firmware

OWNLOAD THE

OFTWARE

Go to the Dynacord web site to download the software: http://www.dynacord.com/en/downloads

DYNACORD DSP 260

Page 1 • Front panel lock will lock all the setup menu screens except the lock screen • Fixed minor display bugs 4 Installing V1.4.0 Software and Firmware OWNLOAD THE OFTWARE Go to the Dynacord web site to download the software: http://www.dynacord.com/en/downloads...
Page 2 DYNACORD DSP 260 2.0 F BOUT ICROSOFT RAMEWORK The .NET Framework is Microsoft's comprehensive programming model for building applications that have visually stunning user experiences with seamless and secure communication. It is necessary to have .NET Framework installed on your computer. Check for .NET Framework on your computer by going to Start >...