Do you have a question about the IRD-2900 Series and is the answer not in the manual?
Questions and answers
Summary of Contents for Dawnco IRD-2900 Series
Page 1
1.70/ J 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com You are entitled to the manufacturer's limited express warranty, if any, that accompanies the product. DAWNco makes no additional or independent warranty.
Page 2
The information contained herein is merely descriptive in nature, and does not constitute a binding offer for sale of the product described herein. IRD-2900 User Manual Rev 4.5.doc 7/20/2007 8:49:00 AM File . Saved DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 3
The appendices in this manual cover the issues of software upgrade, aspect ratio configurations, warning massages, configuration file, and installation procedures in French. Scopus Documents (p/n 100793) Page i DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC Rules. Page iv (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
For the take-back of Scopus equipment, customers must act in accordance • with the Scopus take-back policy, as provided in the website. Scopus Documents (p/n 100793) Page v DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 12
Figure 4-40: Unit Serial Screen............4-148 Figure 4-41: Unit Ethernet Screen............4-151 Page x (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 13
Spécifications de dimensions des rack-slides de Scopus....F-4 Figure F-3: poser l’appareil sur les Rack-Slides ........F-5 Scopus Documents (p/n 100793) Page xi DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 14
Alimentation électrique DC et vis de contact à la masse ..F-15 Page xii (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Scopus offers this series of professional IRDs in a wide range of standard configurations, with the flexibility to select specific interfaces and applicable required features. Scopus Documents (p/n 100793) Page 1-3 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
LEDs show the WARNING and PWR/FAIL status (see Figure 1-3). Figure 1-3: Front View of the IRD Scopus Documents (p/n 100793) Page 1-5 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The Russian SECAM D/K (composite video only) is available only through Special orders. Page 1-8 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
In the case of power failure or system shutdown, ASI OUT 1 output will become ASI loop-through. Use ASI OUT 1 output for cascading a chain of IRD-2900. Scopus Documents (p/n 100793) Page 1-9 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 30
ASI loop-through. Use ASI OUT 1 output for cascading a chain of IRD-2900. Page 1-14 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
ASI loop-through. Use ASI OUT 1 output for cascading a chain of IRD-2900. The Russian SECAM D/K (composite video only) is available only through special orders. Scopus Documents (p/n 100793) Page 1-15 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
ASI format, network and service information, CA information, CI slots, video and audio decoded information Page 1-26 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
OING SO MAY RESULT IN DAMAGE TO THE RACK DEVICE AND OTHER MOUNTED DEVICES Page 2-2 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
MOUNT DEVICES MAY RESULT IN OVERHEATING AND DAMAGE TO ONE OR MORE MOUNTED DEVICES Scopus Documents (p/n 100793) Page 2-3 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Figure 2-3 is a see-through illustration, demonstrating the placing of the device on the rack-slides. Page 2-4 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
3. Fasten the mounting brackets to the side-rails with four screws (two on each side). The device is now safely installed within the rack. Scopus Documents (p/n 100793) Page 2-5 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
RACK-SLIDES. DOING SO MAY RESULT IN COLLAPSING OF THE RACK- SLIDES, SERIOUS INJURIES TO PERSONNEL, AND DAMAGE TO EQUIPMENT. Page 2-6 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Figure 2-6 illustrates multiple devices when rack-mounted on a single pair of rack-slides. Figure 2-6: Multiple Devices Mounted on a Single Pair of Rack-Slides Scopus Documents (p/n 100793) Page 2-7 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
• further information see section 4.2.5.1) Using a valid card licensing • Page 2-8 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The service selected is displayed on the LCD display. Video picture is displayed on monitor. Audio channels left and right. Page 2-16 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The LCD display is a large, easy to use, graphical display. It is used to display enhanced menus with graphical interfaces, such as: charts, radio buttons, tables, and icons. Scopus Documents (p/n 100793) Page 3-1 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 3-2 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 63
To access the next menu level press [Enter] to select the marked item (either another menu navigation screen or an Edit Menu screen). Scopus Documents (p/n 100793) Page 3-3 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 64
This can be a Table Menu screen, an Edit Value screen, or a Select Value screen. Page 3-4 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 65
Press [Enter] to select the currently enabled button The selected option becomes enabled and the former active option is disabled. Scopus Documents (p/n 100793) Page 3-5 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 66
When entering an wrong or out-of-range value the display dismisses the last change and returns one level up in the menu tree. Page 3-6 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 67
). The display returns up one level to the Select Value screen; the new option is displayed as the current parameter option. Scopus Documents (p/n 100793) Page 3-7 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
FireFox, Opera, and so on. The section is divided into the following groups: Scopus Documents (p/n 100793) Page 3-11 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
3. Verify that the entered IP address is not allocated to any other device. Page 3-16 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
When selecting a preset, the front panel's orange warning light might lit until the unit is synced with the new setup applied. Scopus Documents (p/n 100793) Page 4-3 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
To access the Save menu from the web-interface, go to Preset Save. Page 4-4 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
1. Access the Overwrite Existing screen. From the front panel go to Root Preset Save Current Overwrite Existing. Scopus Documents (p/n 100793) Page 4-5 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
3. Open the Overwrite Existing drop-down menu. From the list select a preset to overwrite. Page 4-6 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
3. Type a name for the preset in the New-Name textbox. 4. Press [ENTER] to finish. Scopus Documents (p/n 100793) Page 4-7 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
To rename a preset through the web-interface: 1. From the management bar, click on the Preset tab. Page 4-8 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
4. Type a new name for the preset in the New-Name textbox. Scopus Documents (p/n 100793) Page 4-9 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
To delete a preset through the web-interface: 1. From the management bar, click on the Preset tab. Page 4-10 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
3. Open the Delete drop-down menu. From the list select a preset to delete. Scopus Documents (p/n 100793) Page 4-11 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The IRD-2900 can support either IP or L-Band receiver modules. The configuration menu structure changes according to each of these available module options. Scopus Documents (p/n 100793) Page 4-13 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
To access the Receiver Configuration menu using the front panel, select Configuration Receiver (independently of the receiver module type). Page 4-14 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
DVB-S Receiver Parameters Menu Screen The DVB-S Receiver Configuration parameters are detailed in the following paragraphs: Page 4-16 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
It is important to input the accurate Symbol Rate down to the sixth digit after the decimal point. Scopus Documents (p/n 100793) Page 4-17 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 96
If the specific Viterbi rate is not provided, selecting the Automatic option enables the IRD-2900 to automatically detect the Viterbi rate. Page 4-18 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 98
ON - Drift Compensation is on; the receiver adjusts its optimal frequency. • Page 4-20 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 99
When selecting the Ku-Band or the C-Band, you must manually set the L.O. frequency (see the following Section in this chapter). Scopus Documents (p/n 100793) Page 4-21 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
1 1 1 1 3 3 3 3 Frequency Frequency Band Band Scan Scan Frequency Frequency Band Band Scan Scan Scopus Documents (p/n 100793) Page 4-23 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The displayed frequency range corresponds with the frequency band that is currently selected. Page 4-24 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 103
The symbol rate must be set to match the exact symbol rate value used by the satellite transponder. Scopus Documents (p/n 100793) Page 4-25 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 105
16APSK rate 2/3 and 3/4, and 32APSK rate 3/4, need pilot assistance for carrier recovery. Scopus Documents (p/n 100793) Page 4-27 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 106
2 2 2 2 NORMAL NORMAL NORMAL NORMAL 3 3 3 3 Page 4-28 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 107
ON (High Band) - the 22 kHz signal is generated and high band reception • is selected. Scopus Documents (p/n 100793) Page 4-29 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
ON - Drift Compensation is on; the receiver tunes to the optimum requency. • Page 4-30 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 109
Ku BAND - selects the frequency range 3.200000 - 4.200000 GHz • C BAND - selects the frequency range 10.700000 - 12.750000 GHz • Scopus Documents (p/n 100793) Page 4-31 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Figure 4-13 displays the corresponding DVB-DSNG receiver parameters menu (Web Management screen). Figure 4-13: DVB-DSNG Receiver Parameters Menu Screen Scopus Documents (p/n 100793) Page 4-33 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 112
It is important to input the accurate Symbol Rate down to the sixth digit after the decimal point. Page 4-34 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 114
LNB, 13v for vertical polarization and 18v for horizontal polarization. Page 4-36 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 115
The available options are: OFF – Low band L.O. • ON – High band L.O. • Scopus Documents (p/n 100793) Page 4-37 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 116
ON - Drift Compensation is on; the receiver adjusts its optimal frequency. • Page 4-38 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 117
OC- - - - 3 SINGLE MODE 3 SINGLE MODE 3 SINGLE MODE 3 SINGLE MODE 6 6 6 6 Scopus Documents (p/n 100793) Page 4-39 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
• options are detailed follows. The three options are detailed as follows: Page 4-42 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Both MPEGoIP input ports must use the same gateway. Page 4-44 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
UNICAST - for selecting Unicast IP address type. The IRD-2900 filters the • relevant transport stream only by the configured UDP port. Scopus Documents (p/n 100793) Page 4-45 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 124
Selecting FEC Column Port displays the following screen, which allows setting the UDP port number carrying the FEC data. Page 4-46 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
ASI Mo 4 4 4 4 The Source parameter defines the input stream source. Scopus Documents (p/n 100793) Page 4-53 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 132
When Front-End (IP) is selected, the 27 MHz Synchronization option must be set to Fixed-Value (see next page). Page 4-54 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
ASI M The ASI Mode parameter allows selecting between BURST format and NORMAL format. Scopus Documents (p/n 100793) Page 4-55 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 134
AFTER FILTERING – Stream passes the CAM and then is directed to the • ASI output DISABLED – ASI output signal is disabled • Page 4-56 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
5. In case the PID filtering strategy is selected, set the required PIDs (see section 4.2.4.3). To access the General submenus go to: Configuration Stream Filtering PID Scopus Documents (p/n 100793) Page 4-59 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
4. In case the PID filtering strategy is select, set the PIDs (see section 4.2.4.3). To access the Select PIDs submenu go to: Stream Select PIDs Page 4-60 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Figure 4-19 displays the corresponding general filtering web management screen. Figure 4-19: General Filtering Parameters Menu Screen Scopus Documents (p/n 100793) Page 4-61 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 140
IRD follows the services' tables and automatically add or remove PIDs accordingly. The user can select two types of services: Page 4-62 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
(if the alarm is not masked, a trap is generated). ITRATE This parameter allows setting the output bitrate limit. Scopus Documents (p/n 100793) Page 4-63 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 142
However, tables are not modified (for example, in service mode, the PAT includes all original services, including those which were dropped) Page 4-64 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Service menu is applicable only when service filtering is selected from the Strategy menu Scopus Documents (p/n 100793) Page 4-65 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Figure 4-20 displays the corresponding Select Services Parameters (Web Management screen). Figure 4-20:Select Services Menu Screen Page 4-66 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 145
NOTE Service menu is applicable only when service filtering is selected from Strategy menu Scopus Documents (p/n 100793) Page 4-67 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 147
PID menu is applicable only when service filtering is selected from the Strategy menu. Scopus Documents (p/n 100793) Page 4-69 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
PIDs. In order to remove an unreferenced PID, select the PID' check box and click Submit. Page 4-70 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 149
• Service menu is applicable only when service filtering is selected from Strategy menu Scopus Documents (p/n 100793) Page 4-71 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
To access the Service Configuration Menu in the front panel control interface go to Configuration Service. Page 4-72 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 151
This group contains parameters that define the response of the IRD-2900 to various operational modes (see Section 4.2.5.6). Scopus Documents (p/n 100793) Page 4-73 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The operator can assign a preferred language to each of the Audio channels, as well as to the available VBIs and Subtitling. Scopus Documents (p/n 100793) Page 4-79 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 158
No specific language is selected. The audio language is set according to the Service PID. Page 4-80 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
To access the PID Select Menu in the front panel control interface go to Configuration Service PID Select. Scopus Documents (p/n 100793) Page 4-81 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
All PID-Assigning screens are identical in structure and functionality. The only difference is the screen header, which changes according to the chosen port. Scopus Documents (p/n 100793) Page 4-83 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
To access the Mapping Port to Service menu in the front panel control interface go to Configuration Service Mapping Port to Service menu. Page 4-84 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 163
HS Data RS RS- - - - 422 STAND ALONE STAND ALONE STAND ALONE STAND ALONE Scopus Documents (p/n 100793) Page 4-85 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
In order to map a port to service thru the front panel, perform the following: Navigate to Configuration Service Mapping Port to Service • Page 4-86 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Mode TLTX Subtitle Blanking Mode Mode Figure 4- : Video Configuration Menu Page 4-90 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 169
This group contains parameters that define VBI functioning for the IRD-2900 Decoder #2. For details on the VBI 2 Parameter, see Section 4.3.4.2. Scopus Documents (p/n 100793) Page 4-91 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Video (1..2) menu and displays the current selection. The following paragraphs detail Video Configuration options. Scopus Documents (p/n 100793) Page 4-93 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 172
LETTER-BOX – Set interpolation to Letter-Box • PASS-THRU – No interpolation occurs. • Page 4-94 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Monitor Aspect Ratio is set to: 4:3. Resolution of the received transport stream is set to full. Scopus Documents (p/n 100793) Page 4-95 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
In the Web management interface, set the STC PCR Delay by typing the required delay (in Milliseconds) into the parameter’s free text window. Page 4-96 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
75% BAR – video output signal is a colour-bar display. • Null – video outputs shut down with no output signal. • Scopus Documents (p/n 100793) Page 4-97 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
This is a read-only parameter (closed captioning data is automatically re-inserted in line 21). Selecting Source displays the following screen: Page 4-100 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 180
E.S (EN-301-775) – TV Guide reinsertion is enabled according to the EN • 301-775 standard Page 4-102 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
INTERNAL – The IRD-2900 inserts the VITS signal according to the ITU-T • standard J. 63. Scopus Documents (p/n 100793) Page 4-103 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 182
330, and 331. Only the IRD-2960, IRD-2961, and IRD-2990 support special Russian SECAM VITS. Page 4-104 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 183
23> 23> The IRD-2900 allows inserting VITC to any line between 0 and 23. Scopus Documents (p/n 100793) Page 4-105 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
VI data accordingly. Line1 is a read-only parameter. VI data is always reinserted into line 11. Scopus Documents (p/n 100793) Page 4-107 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The number of Audio Channel Configurations provided in the Audio Configuration menu is dynamic and is set by the unit configuration. Page 4-114 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 193
Audio1 and Audio2 correspond with Video1 and are always available. Audio3 and Audio4 correspond with Video2 and are available only in dual decoder IRDs. Scopus Documents (p/n 100793) Page 4-115 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 194
DISABLE DISABLE Test Tone Test Tone DISABLE DISABLE 8 8 8 8 Page 4-116 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Volume • Analog Output • Analog Mixer • Digital Format • Test Tone • Scopus Documents (p/n 100793) Page 4-117 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Audio3 Decoder mode is set to AC3 PASSTHRU, Audio 4 must be set to AC3 PASSTHRU as well. Page 4-118 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 199
Recall that Audio 3 and Audio 4 menus correspond with Video2, and are also identical in form and functionality to Audio 1 and Audio 2. Scopus Documents (p/n 100793) Page 4-121 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
1 (‘Pro’) whether the received value was 1 or 0. Page 4-122 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 201
Only Audio Outputs 1, 3, and 4 can currently be tested using the IRD-2900 internal 1 kHz test tone. Scopus Documents (p/n 100793) Page 4-123 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
UDP Source Port Destination Port Num Of Packets Figure 4-34: Data Configuration Menu Page 4-124 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 203
Sets the transfer rate & direction, and the type of data to be sent, through the High Speed Data port. For details see Section 4.2.8.3. Scopus Documents (p/n 100793) Page 4-125 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
• Layer Filtering • The following paragraphs provide details of these parameters. Page 4-126 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
T.S PAYLOAD or outputting only the transport stream payload (the TS • header and the adaptation field are stripped) Scopus Documents (p/n 100793) Page 4-127 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Num of Packets Num of Packets Num of Packets 9 9 9 9 Page 4-128 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The value in each field must be a whole number between 0 and 255. Scopus Documents (p/n 100793) Page 4-131 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
65535> 65535> The value is a whole number between 0 and 65535. Page 4-132 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Slot 2 Configuration edit menu provides access to the CI parameters for the respective IRD-2900 CI Slot: Page 4-136 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
General – Allows the operator to select between the different encryption • modes The following paragraphs detail the BISS parameters. Scopus Documents (p/n 100793) Page 4-139 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 218
EVEN Encryption Mode Encryption Mode EVEN EVEN The General Menu parameters are: Page 4-140 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
When an error is detected, the IRD automatically resets the CAM. Reset time may take 10 to 20 seconds. Scopus Documents (p/n 100793) Page 4-141 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 220
Scopus recommends setting the CAM Timeout value to five seconds or higher. Page 4-142 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Figure 4-37 displays a tree diagram of the Unit Configuration Menu. Figure 4-37: Unit Configuration Menu Scopus Documents (p/n 100793) Page 4-143 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Figure 4-38 shows the corresponding Unit General Web management screen. Figure 4-38: Unit General Screen Page 4-146 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Confirm New Password – re-enter the new password • This feature is available only true the Web-Management. Scopus Documents (p/n 100793) Page 4-147 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Unit Serial Screen The following paragraphs detail the Unit Serial Control Port configuration options. Page 4-148 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
010.008.000.216 The value in each field must be a number between 0 and 255. Scopus Documents (p/n 100793) Page 4-151 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 230
Use the [UP]/[DOWN] keys to change a characters value. User the [LEFT]/[RIGH] keys to move to a different character. Page 4-152 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The GPI 1 and GPI 2 configuration menus are identical. The following is the GPI 1 Edit Menu screen: Page 4-154 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 233
The HW Failure menu defines whether or not a Hardware Failure warning will cause a GPI warning indication. Scopus Documents (p/n 100793) Page 4-155 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
2. In the Trap Table, type valid values for the IP Address, Port, Description (optional) and Community String (optional) parameters. For example see Figure 4-45. Page 4-160 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
2. Click the Apply button located right to the trap entry. For example see Figure 4-47. Figure 4-47: Modify Trap Destination Scopus Documents (p/n 100793) Page 4-161 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The following paragraphs detail the Status screen of each available receiver module type (DVB-S, DVB-S2, and IP). Scopus Documents (p/n 100793) Page 4-163 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
C/N that can be measured without forcing the receiver to saturation. Page 4-164 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 243
(see Section 4.2.2), the value displayed is IRD-2900 selected. When you set the Spectral Inversion manually, the user selects the value. Scopus Documents (p/n 100793) Page 4-165 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
IRD-2900 and had the TS error indicator bit set Page 4-170 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 249
Stream Date – displays the date (DD-MMMM-YYYY) of the current incoming • stream Scopus Documents (p/n 100793) Page 4-171 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
4 4 4 4 Figure 4-54 displays the corresponding Web management screen. Page 4-172 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 251
VBI 2 (if applicable) - This group displays information about the VBI for • Decoder #2, See Section 4.2.6.2. Scopus Documents (p/n 100793) Page 4-173 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 252
• decoded service. There are two available values: Normal, and 3:2 Pulldown Page 4-174 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 253
E.S Bottom Num Lines – Counts the number of E.S VBI lines in a field • Scopus Documents (p/n 100793) Page 4-175 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Figure 4-55 displays the corresponding Web management screen. Figure 4-55: IRD-2900 Audio Status Screen Page 4-176 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 255
The Channel ID parameter value is according to the channel number of the AC3 header. Scopus Documents (p/n 100793) Page 4-177 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Status Data IP Output Port. The following screen displays the Output Port Status menu: Page 4-178 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
When the IP Data Port link status is down or when the IP Data Port is disconnected, the horizontal bars [--] are displayed Scopus Documents (p/n 100793) Page 4-179 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 260
C. E MBEDDED This feature will be supported in future software releases. Page 4-182 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
IRD-2900 model number as printed on the front panel. Serial Number – Displays the IRD-2900 serial number • Scopus Documents (p/n 100793) Page 4-183 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
To access the Monitoring Menu in the front panel control interface go to Status Unit Monitoring. Page 4-184 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 263
The horizontal bars [--] are displayed when the Management Port link status is down or when the IP Data Port is disconnected. Scopus Documents (p/n 100793) Page 4-185 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
3. Type “cmd” in the combo-box and click OK. The terminal window is displayed. Page A-2 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
1. Log on to the IRD-2900 with the user name and password, both are empty for the IRD. 2. Reply with [Enter] for both user and password requests. Scopus Documents (p/n 100793) Page A-3 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
3. After connecting to the IRD-2900 through FTP, type “bin” and Click [Enter]. Figure A-5: Access Bin Folder Page A-4 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Enter a connection, for example IRD29000 and lick OK. Select a connection (Icon). Page A-8 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
3. Select a PC COM port that is the specific PC COM to which the IRD-2900 is connected. Figure A-9: Select PC COM Port Scopus Documents (p/n 100793) Page A-9 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
The user can also type “help” to see the IRD-2900 help commands. Page A-10 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
1. After the PC-to-IRD-2900 Communication is checked, in the Root directory type “config/unit/upgrade_sw” and confirm by typing “yes”. Scopus Documents (p/n 100793) Page A-11 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
After the previous software is erased, message “Ready For Receive” is displayed. 2. In the HyperTerminal, select Transfer send file. Scopus Documents (p/n 100793) Page A-13 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
4. Specify the path of the software file on your PC, for example: Page A-14 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
6. Wait until the IRD-2900 is finished rebooting the new software. 7. On the front panel, verify that the new version is installed. Scopus Documents (p/n 100793) Page A-15 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Then copy the address from the IP Address parameter. For example ‘update 10.100.1.26’. Scopus Documents (p/n 100793) Page B-1 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 284
If power failure occurs during upgrade, repeat the upgrade from step 1 Page B-2 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
This is one of two parameter values which the Conversion Machine needs for its operation (see Figure C-1). Page C-2 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Can be output if WSS is set as Video Stream UTPUT ISPLAY 16:9 Page C-4 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 289
IRD-2900 Series Professional Integrated Receiver Decoders Scopus Documents (p/n 100793) Page C-5 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 290
TV Monitor or TV Monitor or Video Stream Video Stream Video Stream Page C-6 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 291
With 16:9 L/B signalling as auto sense, 16:9 monitor can convert the picture to Normal 16:9 Scopus Documents (p/n 100793) Page C-7 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Page 292
User Manual Appendix C Aspect Ratio Configuration Process UTPUT ISPLAY 16:9 16:9 16:9 Page C-8 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
HS Data RS422 • General Configuraion • Service strategy • Service CAS open • Page D-2 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
• LNB L.O. Type • Frequency Range • Frequency Band Scan • Page D-4 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
IRD-2900. LORSQUE VOUS ENLEVEZ L’UNITE, ENLEVEZ AUSSI LA CONNEXION A LA TERRE, UNIQUEMENT APRES AVOIR ETEIND ET DEBRANCHE L’UNITE. Page F-2 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Après avoir resserré entièrement les rack-slides de soutient du rack, effectuez les étapes suivantes afin d’installer l’appareil dans le rack: Page F-4 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
être connectée au boitier du rack, devant être correctement relié à la masse (voir Figure F-10). Scopus Documents (p/n 100793) Page F-13 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
à travers les menus et pour des informations concernant la configuration des paramètres. F.5.3 Réglage Scopus Documents (p/n 100793) Page F-15 DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
Une image vidéo est affichée sur le moniteur. Des chaines audio gauche et droite. Page F-16 (Rev. 4.5/ SW v1.70/ June 2007) DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com...
This manual is also suitable for:
Ird-296 seriesIrd-298 seriesIrd-299 seriesProview 2900 seriesIrd-2960Ird-2961...
Show all
Need help?
Do you have a question about the IRD-2900 Series and is the answer not in the manual?
Questions and answers