Rigging - Dynacord D 8A - V06 Owner's Manual

7. Your system is now ready for operation. Individual
sound adjustments necessary can be made using the
controls of the mixer's corresponding input
channels.
8. Now, have fun with your D 8A system!

2.4 Rigging

CAUTION: We expressly point out that the relevant safety regulations must be observed for "flying" loudspeaker
systems. It is imperative that qualified expert advice is sought.
CAUTION: Suspending any object is potentially dangerous and should only be attempted by individuals who have
a thorough knowledge of the techniques and regulations of rigging objects overhead. Dynacord
strongly recommends that D 8A speakers be suspended taking into account all current national, fed-
eral, state and local regulations. It is the responsibility of the installer to ensure that D 8A speakers are
safely installed in accordance with all such regulations. If D 8A speakers are suspended, Dynacord
strongly recommends that the system be inspected at least once a year. If any sign of weakness or dam-
age is detected, remedial action should be taken immediately.
Order No. see Specifications (page 20)
FB-D8
MB-D8 UMH
9.
FB-D8 + FB-TV
FB-D8 + FB-TV
+ TC-TV
MB-D8 UMH
MB-D8 UMH
+ RMA +TMA
+ TC-02
After use, first switch off the D 8A and then the
mixing console, so that distracting power-off noise
will not occur. When using a DYNACORD CMS mixer,
no power-off noise will be output from the 'Master
Outputs'. This allows switching off the mixer first
without a problem.
FB-D8 + PCL-M10
FB-D8 + TC-02
FB-D8 + FB-TV
+ PM-TV
WMK-10
D 8A
7