Advertisement
Illustration 11: Vertical orientation
CAUTION:
Eyebolts must be fully seated and orient in the plane of pull as shown. Always use washers
under the eyebolt to distribute the load on the enclosure.
12000 Portland Avenue South, Burnsville, MN 55337, USA
Phone: +1 952/844-4051, Fax: +1 952/884-0043
www.dynacord.com
© Bosch Communications Systems
Part Number F01U164570 Vs 01
Illustration 9: C 25.2 vertically
suspended (CORRECT)
WARNING:
Suspension
points are to
be used for a
single enclo-
sure only, never arrays.
Never exceed the limita-
tions or maximum recom-
mended working load for
the C 25.2 systems.
09/2010
Illustration 10: C 25.2 vertically
suspended (INCORRECT)
Illustration 12: Horizontal orientation
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
Asia & Pacific only. For customer orders, contact Customer Service at:
For technical assistance, contact Technical Support at: +49 9421-706 0
+49 9421-706 0 Fax: +49 9421-706 265
+65 6571 2534 Fax: +65 6571 2699
Specifications subject to change without notice.
Advertisement
