XINYI Sini Audio XY-C160H Manual

XY-C160H 160W*2 Bluetooth 5.0 Amplifier Module
1.Description:
XY-C160H is a high-power 160W*2 Stereo 2.0 Bluetooth 5.0 Audio Amplifier Module which also can be
control by APP Sinilink. 2.0 channels audio signal output. Built-in amplifier module therefore it can
connect to loudspeaker directly. It supports Bluetooth music receive and AUX/USB audio input. It is ideal
for DIY wireless Bluetooth speakers and transponders.
2.Features:
1>.160W*2 Dual Channel Stereo.It has a built-in TDA7498E amplifier chip to provide 160W*2 high
power drive capability with DC12V-38V work voltage.Recommended to use more than 5A current to get
more clear, bright and high fidelity sound.
2>.High Current Power Switch. It uses an independent boat-shaped power switch which is convenient
to control the power switch as well as to protect the normal operation of the internal equipment.
3>.Bluetooth APP Control.It can not only be used as an ordinary Bluetooth receiver, but also use the
special Bluetooth APP SiniLink to achieve the play state switching and sound quality playback. In
particular, it can support the modification of the Bluetooth name and set the Bluetooth pairing password
which greatly improving the safety of the use of the product.
4>.Bluetooth/AUX/U-disk Audio. It can not receive music from Bluetooth, but also can get from AUX
and U-disk to adapt to different applications. It can play WAV, FLAC, APE, MP3 music file. Support
ON/OFF voice prompt, adjust volume, switch next/prev, switch play mode and so no.
5>.Protection Function. It has multiple protection mechanisms to ensure its safe operation with
Over-voltage protection, under-voltage protection, short-circuit protection, overheating protection,
clipping protection.
3.Parameters:
1>.Product name:XY-C160H 220W*2+350W HIFI 2.1 Bluetooth 5.1 Amplifier Module
2>.Model:XY-C160H
3>.Work Voltage:DC 12V-38V(15V or more recommended)
4>.Work Current:>5A
5>.Unique function:Sinilink APP control
6>.Controller IC: TDA7498E
7>.Channel:2.0 channel stereo output
8>.Bluetooth:BLE 5.0
9>.Audio input type:Bluetooth/AUX/U-disk/USB sound card
10>.Audio output type:Left/Right
11>.Adjust volume:360° Potentiometer adjustment
12>.Frequency range:20Hz-20KHz
13>.Output power:
13.1>.Output power 35W*2 at 24V 8ohm
13.2>.Output power 70W*2 at 24V 4ohm
13.3>.Output power 80W*2 at 36V 8ohm
13.4>.Output power 160W*2 at 36V 4ohm
14>.Communication distance:15meter(Max)
15>.Over temperature protection:Yes
16>.Short circuit protection:Yes
17>.Over voltage protection:Yes
18>.Under voltage protection:Yes
19>.Clipping protection:Yes
20>.Work Temperature:-20℃~85℃
21>.Work Humidity:5%~95%RH
22>.Module Size(Installed):110*82*25mm
4.Use steps:
1>.Choose the right speakers and connect as shown in wiring diagram.
2>.Connect to right power supply from DC-005 power socket.LED indicator will flashing and it means
that module enters pairing mode.And then speak prompt voice and it means that module is waiting for
pairing.
3>.Turn ON Bluetooth on phone.
4>.Select Bluetooth device 'XinYi' or modified name in your Bluetooth device listing.
5>.LED indicator will keep ON and it means that module is successfully connected and is waiting for
playing.
6>.Module will playing music after select music on phone.LED indicator will keep slowly blinking.
7>.Adjust potentiometer to change volume as you need.
8>.Open APP Sinilink and register an account if need control by APP.
9>.Click the dot with Bluetooth logo(in the middle).
10>.Select 'Bluetooth devices' and then Search Bluetooth.
11>.Select devices 'Sinilink-APP' to connect module.
XY-C160H 160W*2 2.0 Bluetooth 5.0 Amplifier Module
1