Advertisement
Quick Links
ASSEMBLY MANUAL
Licensed Under U. S. PATENT No. RE44055
Stock Code:
RB63TO
Version #3.2
April 14, 2025
Thank you for purchasing a 6' x
3' Raised Garden Bed Trellis/Lid
Kit. Please take the time to
identify all the parts prior to
assembly.
Please use Safety Eyewear and Gloves
while assembling. Be sure to read and
follow all operating instructions for any
tools used during assembly.
Remember- NO SAW CUTTING IS
REQUIRED!
Safety Points and Other
Considerations
Please follow this instruction manual
when assembling your Raised Garden
Bed and retain the manual for future
maintenance purposes.
A
Trellis/Lid Dimensions:
A: Width = 72"
C
B: Height with Lid Closed = 35"
C: Height to top of Trellis = 71"
B
Estimated Assembly Time for
the Lid/Trellis Option = 1/2 Hour.
Advertisement
Related Manuals for Outdoor living today RB63TO
Summary of Contents for Outdoor living today RB63TO
- Page 1 ASSEMBLY MANUAL Licensed Under U. S. PATENT No. RE44055 Stock Code: RB63TO Version #3.2 April 14, 2025 Thank you for purchasing a 6’ x 3’ Raised Garden Bed Trellis/Lid Kit. Please take the time to identify all the parts prior to assembly.
- Page 2 Work Gloves Safety Glasses In the event of a missing or broken piece, simply call the Outdoor Living Today Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our commitment to you to courier replacement parts, free of charge, within 10 business days of this notification.
- Page 3 Orientate Trellis/Lid Panels - Part A (screen down) as illustrated below on flat level ground. Align so vertical framings are tight together. Use wood clamp to hold framings together. Tight together Screw panels together with 4 - 2” Screws as shown above. Place completed Trellis/Lid on top of raised bed framing as shown above.
- Page 4 With Trellis/Lid evenly positioned on raised bed framing, locate 4 Black Plastic Hinges - Part B and 24 - 3/4” Black Screws. Align 1st hinge with counter sunk holes facing up. Position hinge approx. 5” from end. Attach to top framing of 6x3 raised bed with 3 - 3/4” Black Screws per hinge.
- Page 5 Spacer To install Trellis/Lid Arms (C), measure 16” up from bottom and 17” from the rear of panel. Pre-drill shallow 1/8” hole 3/8” from top of framing to help you position arm. Locate Trellis/Lid Arm Spacer and position next to framing.
- Page 6 Note; Rear Trellis Cleat is only required when you plan to use Trellis in the up position for an extended period of time. Not required of you plan on opening and closing your lid often. If required, locate Rear Trellis Cleat (D). Center on 6x3 Raised Bed center framing and Trellis/Lid panel framing.
Need help?
Do you have a question about the RB63TO and is the answer not in the manual?
Questions and answers