Sealey PW1860.V2 Manual
Sealey PW1860.V2 Manual

Sealey PW1860.V2 Manual

130bar pressure washer with tss & rotablast nozzle

Advertisement

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Wear face
Refer to
protection
instructions
1. SAFETY
CAUTION - READ THE INSTRUCTIONS BEFORE USING THE MACHINE.
1.1.
ELECTRICAL SAFETY
WARNING! It is the user's responsibility to check the following:
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and
9
all electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical
products.
Electrical safety information. It is important that the following information is read and understood:
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
9
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
9
Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the
correct fuse.
DO NOT pull or carry the appliance by the power cable.
8
DO NOT pull the plug from the socket by the cable.
8
DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or is replaced immediately by a
8
qualified electrician.
If the cable or plug is damaged during use, switch off the electricity supply and remove from use. Cable must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
The Electric supply connection shall be made by a qualified electrician and comply with IEC 60364-1.
9
It is recommended that the electric supply to this machine should include either a residual current device that will interrupt the supply
9
if the leakage current to earth exceeds 30mA for 30ms or a device that will prove the earth circuit.
WARNING! Inadequate extensions cords can be dangerous. If an extension cord is used, it shall be suitable for outdoor use, and the
connection has to be kept dry and off the ground. It is recommended that this is accomplished by means of a suitably rated cord reel
which keeps the socket at least 60mm above the ground.
Ensure that repairs are carried out by a qualified electrician.
9
1.2.
PRESSURE WASHER SAFETY
Read the instructions fully before use. The manual forms an integral part of the appliance and should be kept for future reference.
9
Please read it carefully before installing/using the unit. If the appliance is sold, the seller must pass on this manual to the new owner
along with the appliance.
WARNING! Wear appropriate personal protective equipment for the task in hand. Risk assess the task and select: safety boots,
safety gloves, safety helmets with visors, protective clothing, hearing protection as necessary.
WARNING! Machine/high pressure cleaners, shall not be used by children or untrained personnel.
DO NOT allow children to use the appliance; supervise them to ensure that they do not play with it.
8
WARNING! RISK OF EXPLOSION. DO NOT use the appliance to spray flammable liquids.
DO NOT use the appliance with flammable or toxic liquids, or any products which are not compatible with its correct operation. Use
of the appliance in a potentially inflammable or explosive atmosphere is forbidden.
WARNING! HIGH PRESSURE JETS can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical
equipment or at the unit itself.
WARNING! HIGH PRESSURE HOSES, fittings and couplings are important for the safety of the machine. Use only hoses, fittings
and couplings recommended by the manufacturer.
DO NOT point the water jet at people or animals.
8
DO NOT splash or wash the machine down.
8
WARNING! ENSURE that all people or animals keep a minimum distance of 15m.
DO NOT use the appliance with people within its range of action unless they wear protective clothing.
8
DO NOT direct the jet at yourself or others in order to clean clothing or footwear.
8
DO NOT use the appliance outdoors when it is raining.
8
DO NOT touch the plug and/or socket with wet hands.
8
DO NOT use the appliance if the electric cable is damaged. If the electric cable is damaged, it must be replaced by the manufacturer,
8
one of its authorised Service Centres or similarly qualified persons in order to avoid a safety hazard.
DO NOT use the appliance if important parts such as the safety devices, high pressure hoses, trigger or gun are
8
damaged.
DO NOT jam the trigger in the operating position.
8
© Jack Sealey Limited
130BAR PRESSURE WASHER WITH TSS &
ROTABLAST® NOZZLE
MODEL NO:
Wear protective
Wear safety
gloves
footwear
Original Language Version
PW1860.V2
Wear protective
Wear ear
clothing
protection
DO NOT
DO NOT direct jet
drink water
against yourself,
from pressure
other persons,
washer
animals, electrical
equipment or the
machine itself
PW1860.V2
Issue 1
08/03/2024

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PW1860.V2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sealey PW1860.V2

  • Page 1 PW1860.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2: Specification

    Ideal for cleaning vehicles, machinery, as well as patios and other outdoor surfaces. Brass quick release system allows for fast selection between nozzles and allows compatability across the Sealey range of pressure washers and accessories. Pressure gun includes lock to avoid accidental start. 1600W Motor produces up to 130bar of pressure with an impressive 420L/hr flow rate.
  • Page 3 Attach the main lance to the middle extension lance. fig.1 fig.2 5.3. Pull back quick release mechanism of the main lance and select the nozzle required and insert. Then release the mechanism. PW1860.V2 Issue 1 08/03/2024 Original Language Version © Jack Sealey Limited...
  • Page 4: Operation

    WARNING! Check that the supply voltage and frequency correspond to those specified on the appliance data plate. The appliance ‰ should only be connected to a mains power supply via a security breaker (Max.30mA) to cut off the electricity supply in the instance of a short circuit. Original Language Version © Jack Sealey Limited PW1860.V2 Issue 1 08/03/2024...
  • Page 5 When not using the pressure cleaner, press the lock button to keep from accidentally engaging the high pressure spray. fig.10 6.5. HOLDING THE GUN 6.5.1. Hold the gun correctly to resist kickback forces: one hand on the handle, one on the lance. Original Language Version © Jack Sealey Limited PW1860.V2 Issue 1 08/03/2024...
  • Page 6: Maintenance

    8.3. Disconnect the high pressure hose and the garden hose, and coil high pressure hose for storage. 8.4. Store in a frost free area with a temperature above 0°C. PW1860.V2 Issue 1 08/03/2024 Original Language Version © Jack Sealey Limited...
  • Page 7: Troubleshooting

    Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505. Important: No Liability is accepted for incorrect use of this product.

Table of Contents