RMML
Ideal for remote controlled interior and exterior lighting, motors, pumps...
Suitable for classic lighting circuits, halogen, low voltage and all types of appliances.
Start/Stop Functions. Replaces the original on/o switch.
Ideal für ferngesteuerte Innen-und Außenbeleuchtung, Motoren, Pumpen, usw.
Geeignet für klassische Beleuchtung, Halogenlampen, Niederspannungslampen und die meisten anderen
Lampenarten.
Start- / Stoppfunktion: Ersetzt den originalen Ein-/Ausschalter.
Ideaal voor het op afstand besturen van binnen en buitenverlichting, motoren, pompen...
Geschikt voor standaard- en halogeenverlichting en allerlei types laagspanningapparaten.
Start/Stop functies. Vervangt de originele aan/uit knop.
Perfekt för ärrstyrd belysning både inomhus och utomhus, för motorer, pumpar...
Lämplig för vanliga klassiska belysningskretsar, halogenlampor, lågenergilampor och alla slags apparater.
Start/Stopp funktioner. Ersätter den ursprungliga på/av knappen.
Idéal pour créer une commande à distance d'éclairage intérieur comme extérieur, un moteur, une pompe ...
Adapté pour circuit d'éclairage classique, halogène, basse tension et tous types d'appareils. Fonctions
Marche/Arrêt. Remplace l'interrupteur d'origine.
Ideal para iluminación interior y exterior con control remoto, motores, bombas, etc.
Adecuado para circuitos de iluminación clásicos, halógenos, de bajo consumo y todo tipo de aparatos.
Funciones de Arranque/Detención. Sustituye al interruptor de encendido/apagado original.
Ideal para o controlo da iluminação interna e externa, motores, bomba ...
Adequado para circuito de iluminação convencional, halogéneo, baixa tensão e todos os tipos de aparelhos.
Funções Start/O . Substitui o interruptor On/O original.
Ideale per telecomandare l'illuminazione interna ed esterna, motori, pompe...
Adatto ai classici circuiti per illuminazione, alogena, basso voltaggio e tutti i tipi di apparecchi elettrici.
Funzioni Start/Stop. Sostituisce l'interruttore originale on/o .
RECEIVER
Micro Appliance Module
TECHNICAL
CHARACTERISTICS RMML
INSTALLATION :
Wire up the micro-receiver
between the mains (Live +
Neutral) and the light, or behind a
wall socket (65mm ø in-wall box,
min depth 40mm) to remotely
control a stand up lamp.
Can be combined with one or
more EMML micro-transmitters,
remote controls and all other
products from the ebode range.
FUNCTIONS:
Remote control start/stop
APPLICATIONS:
Installation or replacement of all
incandescent, halogen, low
voltage spots up to 500 watts,
energy saving bulbs ( uorescent)
and LED up to 300 watts.
Appliances up to 8A when
inserted behind a wall socket.
POWER SUPPLY
230V ~ 50 Hz
More from ebode
EMML
RMA
RPL
TPC
www.ebodeelectronics.eu
Need help?
Do you have a question about the RMML and is the answer not in the manual?
Questions and answers