Siemens SN63HX15VE Information For Use
Siemens SN63HX15VE Information For Use

Siemens SN63HX15VE Information For Use

Table of Contents

Advertisement

Quick Links

SN63HX15VE
Dishwasher
EN Information for Use
Register your appliance on My Siemens and
discover exclusive services and offers.
Siemens Home Appliances

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SN63HX15VE and is the answer not in the manual?

Questions and answers

Summary of Contents for Siemens SN63HX15VE

  • Page 1 SN63HX15VE Dishwasher EN Information for Use Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
  • Page 2: Table Of Contents

    en Table of contents You can find additional information and explanations online. Scan the QR code on the title page. Table of contents Table of contents 1 Safety⁠ ⁠ ..........⁠ ⁠ 3 8.6 Basket heights⁠ ⁠ ......⁠ ⁠ 2 0 1.1 General information⁠...
  • Page 3: Safety

    Safety en 14.7 Terminate programme⁠ ⁠ ...⁠ ⁠ 3 0 18.1 Clean wastewater pump⁠ ⁠ ..⁠ ⁠ 4 4 14.8 Switching off appliance⁠ ⁠ ..⁠ ⁠ 3 0 19 Transportation, storage and disposal⁠ ⁠ ........⁠ ⁠ 4 5 15 Basic settings⁠ ⁠ ......⁠ ⁠ 3 0 19.1 Removing the appliance⁠...
  • Page 4: Restriction On User Group

    en Safety agricultural businesses; use by customers in hotels, motels and other typical home environments; in bed and breakfasts. ¡ Up to an altitude of 4000 m above sea level. 1.3 Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance...
  • Page 5 Safety en When installing the appliance, check that the power cable is not trapped or damaged. Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic housing in water. The plastic housing on the supply hose contains an electric valve. Never cut through the supply hose.
  • Page 6: Safe Use

    en Safety 1.5 Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause seri- ous harm to health. Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products.
  • Page 7: Damaged Appliance

    Safety en Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners to clean the appli- ance. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources.
  • Page 8 en Safety Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts. Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. Never let children play with or operate the appliance.
  • Page 9: Preventing Material Damage

    Preventing material damage en Modified or damaged water hoses 2 Preventing material may result in material damage and Preventing material damage damage damage to the appliance. Never kink, crush, modify or cut 2.1 Safe installation through water hoses. Only use the water hoses supplied ATTENTION with the appliance or genuine Improper installation of the appliance...
  • Page 10: Environmental Protection And Saving Energy

    en Environmental protection and saving energy So as not to scratch the finish on 4 Installation and con- the appliance, do not use sponges Installation and connection nection with a rough surface or abrasive cleaning agents. To ensure proper operation, connect To prevent corrosion, do not use the appliance to the power and water sponge cloths on dishwashers with supply correctly.
  • Page 11: Drainage Connection

    Installation and connection en Check the Scope of supply and Installing the drinking water con- the condition of the appliance. nection Consult the installation instructions Note: If you are replacing the appli- for the installation dimensions re- ance, you must use a new water sup- quired.
  • Page 12: Familiarising Yourself With Your Appliance

    en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. Rating plate with E number and FD number Page 46 .   Rating plate The data you need for Customer Service Page 46 .
  • Page 13: Controls

    Familiarising yourself with your appliance en Add the special salt to the dispenser for Dispenser for special salt special salt.  "Water softening system", Page 21 The lower spray arm washes the tableware in the bottom basket. Lower spray arm If the tableware has not been washed prop- erly, clean the spray arms.
  • Page 14 en Familiarising yourself with your appliance With some buttons you can perform different functions. 3 4 5 6 Page 29 Switching on the appliance   Page 30 ON/OFF button and reset Switching off the appliance   button Terminating the programme Page 30   Programme buttons Programmes Page 15  ...
  • Page 15: Programmes

    Programmes en Door handle  1 Open the appliance door. The display shows information about the remaining running time or the basic settings. You can change the basic set- Display tings via the display and the setting buttons.  "Changing basic settings", Page 33  1 Symbols on the display Symbol...
  • Page 16 en Programmes 20 °E. Different influencing factors such as water temperature or pipe pressure may result in deviations. Programme Programme sequence Tableware: Intensive: Pots and pans, non-fragile Pre-Rinse Intensive 70° tableware and cutlery Cleaning 70 °C Level of soiling: Intermediate rinse Stubborn, burned or dried-on Final rinse 69 °C food remnants containing starch and protein...
  • Page 17: Information For Test Institutes

    Additional functions en 6.1 Information for test insti- The tableware undergoes intermedi- ate cleaning via cold rinsing. tutes Tip: You can use the Home Connect Test institutes are provided with in- app to download additional pro- formation for comparability tests, e.g. grammes and save them to the according to EN60436.
  • Page 18: Features

    en Features Symbol Additional func- tion IntensiveZone Switch on with mixed loads containing table- ware with different soiling levels, e.g. place very soiled pots and pans in the bottom bas- ket and normally soiled tableware in the top basket. The spray pressure in the bottom basket is increased and the maximum programme temperature maintained longer.
  • Page 19: Etagere

    Features en Press in the levers on the right and or for large items of cutlery, e.g. left on the outside of the basket. cooking spoons or serving cutlery. Raise or lower the basket evenly to If you do not need the cutlery shelf, the right level.
  • Page 20: Folding Prongs

    en Features 8.4 Folding prongs Push the lever forwards and fold down the prongs Use the folding prongs to position tableware securely, e.g. plates. To use the prongs again, fold them back up. The prongs audibly click into posi- You can fold the prongs down to po- tion.
  • Page 21: Before Using For The First Time

    Before using for the first time en Start the Programme with the 9 Before using for the highest cleaning temperature Before using for the first time first time Page 30 without tableware.   To remove any marks from water 9.1 Performing the initial con- or other residues, we recommend figuration you operate the appliance without...
  • Page 22: Overview Of Water Hardness

    en Water softening system Note: Set the water hardness determ- ATTENTION ined on your appliance. Detergent may damage the water  "Setting the water softening sys- softening system. tem", Page 22 Only fill the dispenser of the water With a water hardness of 0 - 8 °E softening system with special dish- you can dispense with special salt for washer salt.
  • Page 23: Regeneration Of The Water

    Rinse aid system en ment substances, you can switch the ance performs regeneration of the indicator off. water softening system at regular in- tervals. Note Regeneration of the water softening To avoid damage to the appliance, system takes place before the end of only switch off the water softening the main rinse cycle in all pro- system in the following cases:...
  • Page 24: Setting The Amount Of Rinse

    en Rinse aid system Adding rinse aid Press . To open the basic settings, press If the rinse aid refill indicator lights for 3 seconds. up, top up with rinse aid. Only use The display shows Hxx. rinse aid for domestic dishwashers. The display shows Press the catch on the lid of the Press...
  • Page 25: Detergent

    Detergent en To save the settings, press Powder detergent for 3 seconds. Powder detergent is recommended The rinse aid system is switched for shorter programmes. off and the rinse aid refill indicator The dosage can be adjusted to the is deactivated. level of soiling.
  • Page 26: Unsuitable Detergents

    en Detergent as glass protection or stainless steel According to the manufacturers, cleaner. combined detergents with salt re- According to the manufacturers, placement substances can only be combined detergents generally only used up to a certain water hard- function up to a water hardness of ness, usually 26 °E, without 26 °E.
  • Page 27: Tableware

    Tableware en for dosage in the detergent dis- liquid detergent will spread around penser. the washing tank and dissolve 20 ml – 25 ml detergent is suffi- there. Tablets will fall into the tab- cient for normal soiling. If table- let collecting tray and dissolve in ware is only lightly soiled, slightly the right dosage.
  • Page 28: Arrange Tableware

    en Tableware Cause Recommendation safe to use in the dishwasher with alu- ing agents, do not put aluminium parts minium. in the dishwasher interior. The water temperature of the pro- Select a programme with lower temper- gramme is too high. atures. After the programme has ended, take glassware and cutlery out of the appli- ance without delay.
  • Page 29: Removing Tableware

    Basic operation en To prevent injury, arrange cut- – 14 Basic operation lery with the points and sharp Basic operation edges facing down. 14.1 Switching on the appli- Position containers with the – ance openings facing down so no wa- Press . ter can collect in them. The Eco 50°...
  • Page 30: Setting Timer Programming

    en Basic settings Press the button for the relevant 14.6 Interrupting programme additional function. Note: When you open the appliance  "Additional functions", Page 17 door once the appliance has heated The additional function is set and up, leave the door slightly ajar for a the additional function button few minutes and then close it.
  • Page 31: Overview Of The Basic Set

    Basic settings en 15.1 Overview of the basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description  1 Water hardness H00 - H07 Set the water softening sys- tem to your water hardness.  "Setting the water softening system", Page 22 Level H00 switches the water softening system off.
  • Page 32 en Basic settings Basic setting Display text Selection Description the cabinet front fitted flush. If the appliance door is not completely closed, the spot of light will flash. The pro- gramme has ended when the spot of light is no longer vis- ible on the floor.
  • Page 33: Changing Basic Settings

    Home Connect en Basic setting Display text Selection Description nected the device with the Home Connect app.  "Home Connect ", Page 33 Factory setting Start with Restore changed settings to the factory settings. Confirm with The settings for initial start-up must be configured. 15.2 Changing basic settings The Home Connect services are not available in every country.
  • Page 34: Remote Start

    en Home Connect Scan the following QR code. Tip: To deactivate the function, press  1 16.3 Smart Start Smart Start automatically determines the optimal time for the programme to start. You can use the Home Connect app to activate or deactivate the function. You can install the Home Connect app and connect your appliance Activating Smart Start via the QR code.
  • Page 35: Cleaning And Servicing

    Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.siemens-home.bsh-group.com/ store or from customer service. Machine Care is a programme which removes various deposits in one washing...
  • Page 36: Filter System

    en Cleaning and servicing Phase Removal of Detergent Placement Grease and limes- Liquid machine care Appliance interior, e.g. cale product or machine bottle hung in the cut- descaler in powder lery basket or powder form. in the interior. Food remnants and Machine cleaner Detergent dispenser deposits...
  • Page 37 Cleaning and servicing en Press the locking catches Micro filter gether and lift the coarse filter out Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may block the filters. After each wash check the filters for residue. Turn the coarse filter anticlockwise and remove the filter system Check that no foreign objects Clean the filter elements under run-...
  • Page 38: Cleaning Spray Arms

    This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code on the title page and on our website siemens- home.bsh-group.com. WARNING Risk of electric shock! Improper repairs are dangerous.
  • Page 39 Troubleshooting en Fault Cause and troubleshooting Display "Check water A technical fault is present. supply" flashes Press . Unplug the appliance or switch off the fuse. Wait at least 2 minutes. Insert the mains plug of the appliance in a socket or switch on the fuse.
  • Page 40 en Troubleshooting Fault Cause and troubleshooting E:32-00 will light up The filters in the water connection of the supply or alternately or indicator AquaStop hose are blocked. for water supply lights Switch off the appliance. Pull out the mains plug. Turn off the water tap. Unscrew the water connection.
  • Page 41 Troubleshooting en Fault Cause and troubleshooting E:61-03 will light up alternately. Water is not drained. Not an appliance fault. Wastewater pump is blocked or the cover of the wastewater pump is loose. Clean the wastewater pump.  "Clean wastewater pump", Page 44 Secure the cover of the wastewater pump so it clicks into position.
  • Page 42 en Troubleshooting Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds.  "Controls", Page 13 The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. Pull out the mains plug or switch off the fuse in the fuse box.
  • Page 43 Troubleshooting en Fault Cause and troubleshooting Remnants of food on Filters are inserted incorrectly and/or not engaged. tableware. Insert the filters properly.  "Filter system", Page 36 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme.  "Programmes", Page 15 Tableware has been precleaned too intensely.
  • Page 44: Clean Wastewater Pump

    en Troubleshooting Fault Cause and troubleshooting Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware. Cutlery may also rust if washed together with rusting items. Do not wash rusting items. Salt content in washing water is too high. Remove any spilled special salt from the tub.
  • Page 45: Transportation, Storage And Disposal

    Transportation, storage and disposal en Insert the pump cover and press 19.3 Transporting the appli- down ance To avoid damage to the appliance, empty it before transporting. Note: Always transport the appliance upright to prevent residual water get- ting into the machine's controls and damaging the appliance.
  • Page 46: Customer Service

    en Customer Service Unplug the appliance from the Nr.), the production number (FD) and mains. the consecutive numbering (Z-Nr.) of Cut through the power cord. your appliance. Dispose of the appliance in an en- You can find the contact details for vironmentally friendly manner.
  • Page 47: Technical Specifications

    Technical specifications en to our instructions; this also in- If your appliance is fitted with cludes correctly fitting the Aqua- Aqua-Stop, you can in principle Stop extension (genuine access- leave your appliance unattended ory). Our guarantee does not cover during operation and the tap defective supply lines or fittings up turned on afterwards.
  • Page 48: Statement Of Compliance For Great Britain

    BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provi- sions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at siemens- home.bsh-group.com among the additional documents on the product page for your appliance.
  • Page 49 Declaration of Conformity en group is seen on the title page. The The manufacturer, BSH Hausgeräte full model identifier is made up of the GmbH deems that it has complied characters before the slash in the with product number (E no.) which can be provision 5.1-1 of ETSI EN 303 found on the rating plate.
  • Page 52 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...

Table of Contents