Download Print this page
Sealey GCP02 Manual
Sealey GCP02 Manual

Sealey GCP02 Manual

Car port shelter, 4 x 6 x 3.05m, heavy duty cover

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instruction
protection
manual
1.
SAFETY
This is a temporary structure and is not recommended as a permanent structure.
8
Choose your shelter's location carefully. Check for overhead utility lines, branches, etc. DO NOT install near roofs or other structures that
9
may shed snow, ice or excessive run-off onto your shelter. Keep away from electrical wires!
Have an overview of all parts before attempting installation. Make sure all components are available.
9
DO NOT use this product in environments for which it is not intended (i.e. extreme cold, high winds, extreme heat, heavy rainfall, etc).
8
Always wear safety glasses when assembling this product. Wear gloves when working with tubing to prevent cuts or abrasions.
8
WARNING! Anchors must be used with alI shelters. Covers should NOT be installed until it has been properly anchored to the ground.
Proper anchoring and keeping cover tight and free of snow and debris, is the responsibility of the consumer. Damages caused by
9
improper anchoring are not covered under warranty.
WARNING! Keep all flame and heat sources away from the shelter fabric. The fabric will burn if left in continuous contact with a flame
source.
DO NOT use open flames or cooking or heating devices inside or in close proximity to the product, including all types of stoves, gas
8
heaters, gas lanterns, citronella torches, mosquito coils, etc.
WARNING! In order to reduce risk of burning and avoid damage, DO NOT cook, smoke, refuel or use any open flame devices in or
around the shelter.- store flammable liquids (gasoline, kerosene, propane, etc.) in the shelter.- operate gas powered equipment in or
around the shelter.
Keep open flames a safe distance away from the shelter.
9
DO NOT use hard-edged tools or instruments, such as rakes or shovels, to remove snow. These can cause punctures to the cover.
8
NEVER start the engine of any vehicle or machine inside a closed shelter. Ensure that there is adequate ventilation for starting engines
8
and for any work with paints, cleaners, etc.
DO NOT use bleach, alkaline or harsh detergents for cleaning. Doing so will damage the polycarbonate material. Soap and warm water
8
are recommended.
This temporary shelter is intended to offer protection from damages caused by the sun, light rain, light snow, tree sap, bird and animal
9
excrement. DO NOT use it to shield goods from high winds, heavy snow or ice storms. Only use it for its intended use.
DO NOT assemble in high winds.
8
2.
INTRODUCTION
Tarpaulin cover is made of a PE (polyethylene) material of a 3-layer construction with rip-stop to help prevent tears. UV resistant and
offers long-life and protection to stored items. Cover extends to the floor to further protect from against crosswinds. Includes ratchets
on each corner ensuring the tarpaulin cover is always under tension and secured to the frame which helps protect the car port during
wind and rain. Features a full width roll down door that makes accessibility easy. Zips keep the door shut securely and toggles can hold
the door up and out of the way. Zinc plated steel tubing provides protection from rust and corrosion. Push-fit tubing makes assembly
simple. The tarpaulin cover ties onto the frame and ratchets in place, so the cover remains taught.
3.
SPECIFICATION
Model No:
Door Size:
Nett Weight:
Overall Size (W x D x H):
© Jack Sealey Limited
CAR PORT SHELTER, 4 X 6 X 3.05M, HEAVY
DUTY COVER
MODEL NO:
Wear
protective
gloves
GCP02
2.7m x 2.15m
73kg
4 x 6 x 3.05m
Original Language Version
GCP02
GCP02
Issue:3 13/11/24

Advertisement

loading
Need help?

Need help?

Do you have a question about the GCP02 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sealey GCP02

  • Page 1 GCP02 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 NOTE: It is recommended that two people working together build this item to avoid any damages due to over-twisting of frames. 4.1. FULL ASSEMBLY Recommended tools: 10m measuring tape Step ladder Rope fig.1 4.2. PARTS Original Language Version © Jack Sealey Limited GCP02 Issue:3 13/11/24...
  • Page 3 5.1.5. Connect items 2 to items 8 and items 9 (see diagram) using clamps (item 11) and fixings (item 15) in locations shown below. NOTE: DO NOT tighten fixings at this stage. fig.4 GCP02 Issue:3 13/11/24 Original Language Version © Jack Sealey Limited...
  • Page 4 5.3.2.1. Drag and drop the cover over the roof making sure that the cover is equally disposed. 5.3.2.2. Separate frame members (item 8, item 9) and insert into the pockets in the cover. fig.8 GCP02 Issue:3 13/11/24 Original Language Version © Jack Sealey Limited...
  • Page 5: Maintenance

    Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. REGISTER YOUR PURCHASE HERE Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk...