IMPORTANT SAFETY INSTRUCTIONS Warning The SeatLift is not suitable for individuals with complete loss of lower-limb function or those unable to support their upper body weight, as it requires some degree of leg stability for safe use. The product is intended only for use on stable, stationary surfaces such as chairs, sofas, or toilet seats. It must not be used for any other purpose or in ways that could compromise user safety.
Page 3
5. Evaluate User Suitability Before use, ensure the intended user is suitable for the SeatLift based on weight, body size, cognitive ability, and joint mobility. If the user is disabled or unable to sit safely without assistance, an escort or an alarm device must be present.
Page 4
14. Avoid Moving Parts During use or maintenance, keep hands, feet, and other body parts away from moving sections of the SeatLift to prevent injury. 15. Keep Hand Control Away from Heat Excessive heat can damage the hand control’s electronics and pose a safety risk.
KEY FEATURES Comfortable Seat IP44 Dust and Waterproof Non-slip cushion included Washable Materials Quick & Ease Assembly Removable handles Ergonomic 35° Lift Single-Button Control Relocatable Remote Control Up to 80 lifts per charge Light and Portable Integrated Carry Handle...
COMPONENTS INCLUDED A. 1x Non-Slip Cushion B. 1x Lifting Furnishing C. 1x Left Handle D. 1x Right Handle (w/ Control Holder) 1x Charger 1x Hardware Kit (incl. 4x Screws, 1x Hex Key, 4x Decorative Screw Covers)
Page 8
▪ Verify that all necessary components are included and check for any damage or issues. ▪ If any parts are missing, damaged, or not functioning, contact Innovative Home Technologies immediately. Organize all components in a clear workspace to streamline assembly.
Page 9
Cover Screws using 4x Screw Covers Remove Controller Protective Cover. To prevent accidental activation during transportation, a protective cover was placed over the Control switch. Switch Cover Insert the Hand Controller into the Right Handle holder...
Operation Charging Instructions Before using the product for the first time, it is highly recommended to fully charge the battery. • When to Charge: If the lifting cushion slows down significantly or stops moving, this indicates low battery power. • How to Charge: Use the provided charger and plug it into the charging port located on the left rear side of the product.
Care and Cleaning Instructions Proper care and maintenance will ensure the long-term performance of your SeatLift. Follow these steps to keep it clean, safe, and functiona Cleaning the Lift ▪ Regular Cleaning: Wipe the surfaces of the lift regularly with a damp cloth or sponge to remove dirt and debris.
Welds: A Lifetime Warranty on all welds, ensuring long-lasting durability and safety. If a defect arises, Innovative Home Technologies, LLC will repair or replace the affected product or part at no cost to you, using either new or refurbished parts. Our goal is to ensure your satisfaction and keep your equipment operating like new.
Need help?
Do you have a question about the SeatLift and is the answer not in the manual?
Questions and answers