TPL VISION ZOOM Z-SPOT Technical User Manual

PREAMBLE
This Technical User Guide contains warnings and guidance for correct and safe operation of the product.
These instructions must be followed at all times. TPL Vision will not be held responsible for problems caused
by using the product contrary to these instructions and the Warranty will be deemed invalid.
UNPACKING
This product is packed at the factory using suitable materials for safe transport. To open the package, do not use
any cutting blade to avoid damaging the product(s). Please use the delivered accessories if needed. (Do not use any
other products or equivalents to replace the delivered accessories).
In the event of damage occurring during shipping, it must be reported to the carrier at time of delivery (including
noting the damage in writing on the delivery documents). It is also your responsibility to notify TPL Vision in writing
of the damage within 24 hours of receipt of the package. If these instructions are not followed, TPL Vision reserves
the right not to accept requests for return and exchange of damaged products.
RISK CLASS
The applicable Standard EN-62471 classifies LED Lighting into 4 classes according to their degree of hazard severity.
The table below summarises the risks associated with our standard products.
Colour
–
White WHI (5700K), Red 630 nm,
Green 525 nm, Blue 470 nm
IR 850 nm
UV 365 nm, UV 385 nm, UV 405 nm
Please be careful with the variable optics on this product. With the minimum beam angle (lens at
maximum height) the light is extremely focused. This presents an eye safety issue, particularly with direct
emissions from a short working distance.
ZOOM
TECHNICAL USER GUIDE
Class Risk
0 none
1 low
2 moderate
3 high
Z-SPOT
TPL Vision can provide guidance
notes to minimise
logical risks, including the nom-
inal minimum operating distance.
Please contact TPL Vision through
your usual representative for this
information.
In all cases, TPL Vision recommends
the use of the protection glasses
that are listed in its catalog.
photo-bio-