Reer Simply Hot 3310 Manual

Also See for Simply Hot:

Instructions for use manual (18 pages)

Table of Contents

Contents

1 Description and contents
2 Warming of baby bottles
3 Warming of baby jars
4 Overview of the safety and care information
5 Maintenance and care instructions
6 Documents / Resources
- 6.1 Download manual

Reer Simply Hot 3310 Manual

Description and contents

This appliance allows rapid, reliable and automatic heating of baby food and other suitable foods by heating water. This appliance allows rapid, reliable and automatic heating of baby food and other suitable foods by heating water. The water is heated through a hotplate in the base of the appliance and transfers its heat to the food to be warmed. The water is heated through a hotplate in the base of the appliance and transfers its heat to the food to be warmed. After reaching the preset temperature range, the appliance switches off automatically.
Description and contents
An integrated thermostat regulates the water temperature

Base of the appliance with integrated hotplate
Indicator light for operation
Setting for the temperature range (rotary switch)

Warming of baby bottles

The appliance comfortably and reliably warms standard and wide neck bottles. The water is heated by a hotplate in the base of the appliance, which transfers its heat to the food to be warmed.

Starting up
To allow steam to escape from the bottle, remove the sealing disc between bottle and teat. Place the baby bottle in the appliance and fill the water tank with water up to about 1 cm from the top edge of the tank.

Turn the rotary switch (c) at the front of the appliance to the desired temperature range. The red operating light (b) lights up. This signals to you that the appliance is in operation. The operating light (b) goes off at the end of the warming period.

Note: You can also keep baby food warm for a certain length of time using the baby food warmer. However, this should not exceed one hour for microbiological reasons (formation of germs). To do so, simply leave the bottle or jar in the appliance after warming up, and switch the rotary switch (c) to the position for keeping warm.
Remove the bottle from the baby food warmer and turn the rotary switch (c) for the adjustment of the temperature back to the Off position at the end of the warming procedure. Unplug the appliance from the socket and pour the water out of the baby food warmer.

Before you feed your child, you must check the temperature of the contents. To do this, shake the bottle to distribute the heat evenly throughout and pour 2-3 drops of the contents onto the back of your hand.

Always place the appliance on a dry and flat surface. Please ensure that there is enough water in the tank when warming food. If a bottle or other container is inserted, the water tank must be completely filled with water, up to 1 cm from the top edge of the tank.
The optimal temperature of the food is reached after about 6-8 minutes. The duration may vary depending on the temperature of the water, the ambient temperature, the size and material of the bottle.

Symbols:

	Appliance is switched off
	Warming of milk bottles and baby jars
	Warming of milk bottles and small baby jars
	Warming of large baby jars

Warming of baby jars

The appliance also permits quick, reliable and automatic heating of jar food. The water is heated by a hotplate in the bottom of the appliance, which transfers its heat to the jar to be warmed.

Starting up
Before heating, please remove the label of the baby jar to prevent it coming off during the warming procedure and then becoming stuck to the inside of the water tank of the baby food warmer. Remove the lid of the baby jar before you put the jar into the appliance.

Place the jar in the baby food warmer and fill the water tank with water up to about 1 cm from the top edge of the tank.

Use the rotary switch (c) at the front of the appliance to set the desired temperature range. The red operating light (b) lights up.

The optimal temperature is reached after 8 to 10 minutes and the operating light (b) goes off. We The optimal temperature is reached after 8 to 10 minutes and the operating light (b) goes off. We recommend stirring the food regularly to distribute the heat evenly.
Remove the jar from the baby food warmer and turn the rotary switch (c) for the adjustment of the temperature back to the Off position at the end of the warming procedure. Unplug the appliance from the socket and pour the water out of the baby food warmer.

Before you give the food to the child, you must first check the temperature of the contents.

Always place the appliance on a dry and flat surface. Please ensure that there is enough water in the tank when warming food. If a bottle or other container is inserted, the water tank must be completely filled with water.
The time for heating can be longer or shorter, depending on the contents, amount and the type of container, the starting temperature of the water and the ambient temperature.

Symbols:

	Appliance is switched off
	Warming of milk bottles and baby jars
	Warming of milk bottles and small baby jars
	Warming of large baby jars

Please take a few minutes to read the safety information thoroughly. Follow the instructions in the manual, because otherwise there is the danger that the baby food warmer becomes damaged or in the worst case that either you, your child or another person may be endangered or injured.

You can only use the reer baby food warmer without hesitation if all the points listed here are ensured.

Overview of the safety and care information

We are sure that you will enjoy the quality of our product for a long time. Please read all the instructions carefully.
Please take enough time to do this before using it for the first time. The instruction manual must always be kept with the product and read before use.
Please take a few minutes to read the safety information thoroughly. Follow the instructions in the manual, because otherwise there is the danger that the baby food warmer becomes damaged or in the worst case that either you, your child or another person may be endangered or injured.

General safety information:

Use the device exclusively in the home for its intended purpose. This device is not intended for commercial use. This device is intended for use in private households only.
Do not use if there are any signs of defects.
Regularly check the function (particularly the rotary switch for the temperature control).
Before using for the first time, remove all the packaging material and unused components, so that your child does not injure itself or swallow any of them.
Only connect the appliance to voltages according to the nameplate on the base of the appliance.
Children must not play with the appliance.
The device and its connections cable should be kept away from children under the age of 3.
Children do not recognise the danger that can arise from handling electrical appliances. For this reason, never leave children unattended.
Persons (including children), who due to their physical, sensory or mental capacities or their inexperience or lack of knowledge are not capable of using the appliance safely, should not be allowed to use the appliance without supervision or instruction by a responsible person.
For operation, the appliance must be placed on a dry and flat surface.
Please ensure that there is enough water in the tank when warming food. If a bottle or other container is inserted, the inside of the water tank must be completely filled with water.
Never immerse the appliance in water or any other liquid and do not put in a dishwasher, but instead clean with a damp cloth and washing-up liquid.
Never operate the appliance without water and never move during operation.
Disconnect the power supply after use in order to prevent unintentional continuous use.
Do not use if the appliance or the power cable is damaged.
Repairs should only be performed by a qualified specialist. Unprofessional repairs can lead to considerable danger for the user - this also includes changing the power cable.
The power cord of this device must not be replaced. Dispose of the device if the cord is damaged.
Do not submerge the device, its power cord or plug in water or other liquids.
The cleaning and maintenance of the device must not be done by children, unless they are 8 years or older and are supervised.

In order to avoid hanging cables, for safety reasons the appliance has a practical cable winder on the base of the appliance.

You can only use the reer baby food warmer without hesitation if all the points listed here are ensured.

Maintenance and care instructions

Disconnect the appliance from the power supply before cleaning or descaling!
Do not clean the appliance when it is hot!
Do not use any abrasive cleaning agents or sharp objects when cleaning, as these can attack the surface of the appliance.
Descale the appliance after several uses (depending on the hardness of your water) using, for example, dilute vinegar (hot mixture of approx. 100ml water and 100ml vinegar), in order to warrant perfect functioning of the appliance. Allow to work for approx. 30 minutes, then clean with a damp cloth.