Summary of Contents for Avidsen 127164
- Page 1 WARRANTY TECHNICAL SUPPORT Smart Birdfeeder SMART, CONNECTED FEEDER Wireless, solar-powered Ref.127164 WiFi MOTION DETECTION WEATHER-RESISTANT RESOLUTION NIGHT SOLAR POWERED WIRELESS 1080p VISION www.avidsen.com...
- Page 2 CONTENTS...
-
Page 3: Table Of Contents
2 - VIEWING RECORDINGS 3 - INSTALLATION TIPS 3 - OTHER SETTINGS 4 - RECYCLING 4 - BENEFIT AND USE OF PARTS IN THE AVIDSEN HOME APPLICATION B - PRODUCT 5 - SCENARIO AND AUTOMATION DESCRIPTION E - FAQ 1 - KIT CONTENTS... -
Page 4: A - Safety Instructions
A - SAFETY INSTRUCTIONS 1 - OPERATING PRECAUTIONS IMPORTANT: This device is compatible with 2.4 GHz - WPA/WPA2 WiFi networks. Not compatible • Do not expose the lens to direct sunlight or any with 5 GHz WiFi or with WEP encryption. Please reflected light source. -
Page 5: B - Product Description
B - PRODUCT DESCRIPTION 1 - KIT CONTENTS Camera and feeder Decorative fireplace Perch Fixing screw for drinking trough Water reservoir Decorative flower Fat ball holder Wall mounting bracket Screws for attaching the wall mount Fixing kit (4 dowels, 4 screws) USB/USB-C charging cable... -
Page 6: Camera
B - PRODUCT DESCRIPTION 2 - CAMERA Loudspeaker Twilight sensor PIR detector Reset button LED lighting On/Off button Indicator lights Micro SD card slot (card not supplied) Lens USB-C socket Microphone... -
Page 7: C - Installation
1 - OPERATION 2.2 ASSEMBLING THE BIRD FEEDER We’ll start assembling the bird feeder step by step. This Avidsen Smart Birdfeeder allows you to Follow the instructions carefully to assemble each keep an eye on your feathered friends, and to be... -
Page 8: Installing The Feeder
C - INSTALLATION Step 2: Step 5: Take the perch and place it on the water reservoir. Install the chimney cap supplied and position it on the roof. 2.3 INSTALLING THE FEEDER Step 3: Place the floral decoration supplied on top of the Tip: Make sure the 2.4 GHz Wi-Fi network is perch. - Page 9 C - INSTALLATION Step 2: Step 4: Secure the bracket using the suitable screws and Adjust the orientation of the product to obtain the wall plugs provided. desired angle. Step 3: Install and screw the feeder to the bracket, but do not tighten the screw all the way.
- Page 10 C - INSTALLATION 2.4.2: Filling the fat ball To do this, you need to open the fat ball holder. Next, install the fat ball in the holder and close it. 2.5 MAINTAINING THE BIRD FEEDER Lastly, place the ball with its holder back on the perch.
-
Page 11: Installing The Micro Sd Card
Download the Avidsen Home app from the Play Store or App Store. 3 - INSTALLING THE MICRO SD CARD Launch the app and log in if you already have an account. - Page 12 C - INSTALLATION Note that this email may go into your spam folder. If you do not receive a code before the countdown has ended, press Renvoyer (Resend) and check the email address entered. Select your country, and after entering your email address, tick Valider l’inscription (Validate registration) and then select Obtenir le code de vérification (Get verification code).
-
Page 13: Connecting The Camera
C - INSTALLATION 5 - CONNECTING THE CAMERA If you have more than one item to pair (plugs, cameras, other bulbs), switch on only one item at a time. The following information may vary depending on app updates. Press the on/off button and wait. The camera will play a short melody confirming its correct start-up. - Page 14 If the application does not detect the camera, perform an electrical reboot of the camera. If the camera remains invisible, go to the settings on your smartphone and check that all the authorisations for the Avidsen Home application have been granted. IMPORTANT: your smartphone’s Bluetooth must ************* be activated.
- Page 15 If the transmitted frequency is incorrect, you will need to reset the camera before you can put it online again. Your Avidsen Smart Birdfeeder has been successfully paired. You can set a name by tapping the pencil and pressing TERMINÉ (Finish) 5.2 BY QR CODE...
- Page 16 C - INSTALLATION Select the product you wish to pair, select the Select your WiFi network (note: your smartphone Avidsen Smart Birdfeeder. must be connected to the WiFi network to which the camera will be connected), enter your network password and press SUIVANT (NEXT).
- Page 17 Turn up the brightness of your smartphone to the maximum and then repeat the operation. Your Avidsen Smart Birdfeeder has been successfully paired. You can set a name by tapping the pencil and pressing TERMINÉ (FINISH).
-
Page 18: Resetting The Camera
C - INSTALLATION 6 - RESETTING THE CAMERA The following instructions may help you if you have any problems during the pairing procedure: To reset the camera, press the RESET button for 5 seconds. After a few seconds, the camera will play its start- up melody. - Page 19 C - INSTALLATION complete deletion process, press Confirmer (Confirm). Your device has now been deleted from the app.
-
Page 20: D - Using The Product
D - USING THE PRODUCT 1 - SETTINGS FOR RECORDINGS 1.2 RECORDING WITH AN SD CARD The Avidsen Smart Birdfeeder camera is A micro SD card is required if you wish to create a designed to make recordings that can be viewed continuous recording. - Page 21 D - USING THE PRODUCT Off, Low, Medium and High. The Off mode completely disables detection, while the Low, Medium and High modes adjust the sensitivity of the system to allow more or less reactive detection. The feeder monitoring system also offers the option of enabling or disabling activity detection in a specific area.
-
Page 22: Viewing Recordings
D - USING THE PRODUCT 2 - VIEWING RECORDINGS All photo and video recordings based on motion detection will be present: You can view the photos and the videos saved on the micro SD card from the Message menu, then click on “Tout”... -
Page 23: Other Settings
D - USING THE PRODUCT 1 - Save the picture to the smartphone’s memory; it 3 - OTHER SETTINGS will be accessible in the smartphone’s album. 2 - Delete the picture. 3 - Share the photo by email or the network of your choice. -
Page 24: Benefit And Use Of Parts In The
4 - BENEFIT AND USE OF PARTS IN THE AVIDSEN HOME APPLICATION Once your family has been configured to your With the Avidsen Home application, you can liking, click on “Terminé” (Finish) at the top right. manage different kinds of smart devices (bulb, The family name (“house”... -
Page 25: Scenario And Automation
5 - SCENARIO AND AUTOMATION Each device in the Avidsen Home range can be triggered and interact with other products. This way, you can create life scenarios, grouping different actions or sequences into one, or automatically trigger a device according to the status of another. - Page 26 Motion Alert and On. To finish, press “Appareil” (Device) to access the list of possible Sauvegarder (Save) then Suivant (Next). actions for each device that you wish to trigger with your scenario. In this example, Avidsen HomePlug is selected.
- Page 27 5.2 - CREATING AN AUTOMATION The automation system in the Avidsen Home app allows you to group devices and actions which will be triggered automatically by the action of another device or a condition (temperature, time, etc.).
- Page 28 D - USING THE PRODUCT Go back Save automation Change the name as you wish You can change the background image if you wish Selection of condition type Selection of conditions to be met for actions to be executed Selection of actions to be executed Selection of the automation validity time slot (e.g.
- Page 29 D - USING THE PRODUCT authorise the automation launch: Once all these settings have been confirmed, you can save your automation at the top right Allows you to use a previously defined Scenario (set of actions). Allows you to use a previously defined automation (an automatic action) Allows you to send a notification to the...
- Page 30 D - USING THE PRODUCT 5.2.1 PROGRAMMING THE “LIVING ROOM • FOR THE CAMERA LIGHTING” AUTOMATION The automatic action in this example will allow the user to turn on the bulb at night as soon as motion is detected by the camera and the lamp is already off.
- Page 31 D - USING THE PRODUCT To turn on the bulb: Under these conditions, the actions will start if motion is detected in the camera’s visual field ET (AND) if the bulb is off: Now, set the actions that will be carried out: Then add a “retard”...
- Page 32 D - USING THE PRODUCT Then add the last action, turn off the lamp in this example: The automation is now complete. You can save it at the top right: After these steps, you will have 3 actions: turn on the bulb, wait one minute and turn off the bulb: Finally, you can choose an automation validity period, in this case at night:...
- Page 33 D - USING THE PRODUCT If you wish to access the details or delete it, click on the “ ... ” icon at the top right of its name.
-
Page 34: E - Faq
Android. Android device to get a recent update. Unable to install the Avidsen GooglePlay checks Home app that you have all the essential on my Android device items for the proper operation Try the installation on a different of the app. - Page 35 Android application settings. Please restart Avidsen Home. Make sure that no other Avidsen Home is not allowed to management or power saving run in the background, or has application automatically been completely closed. PUSH Notifications only work...
-
Page 36: F - Technical And Legal Information
• The warranty does not cover damage caused by negligence, knocks or accidents. The parts of this product must not be opened or repaired by any persons not employed by Avidsen. The warranty will be void if the device is tampered with. -
Page 37: Eu Declaration Of Conformity
F - TECHNICAL AND LEGAL INFORMATION 4 - EU DECLARATION OF CONFORMITY Avidsen hereby declares that the equipment designated below: Smart Birdfeeder reference 127164 Complies with the RED 2014/53/EU directive and that its conformity has been assessed pursuant to the applicable standards in force: Directive 2014/35/EU: (protection of users’... - Page 38 Avidsen 19 avenue Marcel Dassault - ZAC des Deux Lions 37200 Tours - France www.avidsen.com...
Need help?
Do you have a question about the 127164 and is the answer not in the manual?
Questions and answers