Download Print this page

Allanson ColorMix ACL-SPI-EXT-Tx Installation Instructions

Spi range extender (transmitter)

Advertisement

Quick Links

ACL-SPI-EXT-Tx
SPI RANGE EXTENDER (Transmitter)
Installation Instructions for SPI Range Extender - ACL-SPI-EXT-Tx
Thank you for your purchase of our Range Extender-Transmitter ACL-SPI-EXT-Tx.
Prior to installing the product, we kindly request that you carefully review all the
provided instructions. For any specific programming requirements tailored to your
needs, please reach out to our LED department at led@allanson.com
**Please Note: In order for this unit to function, you must purchase the
ACL-SPI-EXT-Rx (Range Extender - Receiver)
A
Range Extender-Transmitter ACL-SPI-EXT-Tx
Operating Voltage: DC 12V / 24V
Maximum Power: 5W
Signal In: TTL-SPI to Terminal Block (S, G)
Signal Output: Encoded TTL-SPI signal from RJ45
Dimensions (LxWxH): 3.0" x 1.8" x 0.88"
ACL-SPI-EXT-Tx requires an Allanson's 12V DC or 24V DC class 2 power supply.
Its primary use is a Range Extender-Transmitter. This unit is compatible to use with
B
Range Extender-Receiver ACL-SPI-EXT-Rx
A.
B.
C.
C
cservice@allanson.com | 1.800.661.7251 | www.allanson.com
RJ45
Encoded TTL-SPI signal Out
Power Indicator
Lights on when DC power
Terminal Block
DMX Signals..................A, B (not used)
Data Out........................D, G (not used)
TTL-SPI Signal In..........S, G
Power............................V+, G
5
YEAR
E324538
Page 1/2

Advertisement

loading
Need help?

Need help?

Do you have a question about the ColorMix ACL-SPI-EXT-Tx and is the answer not in the manual?

Questions and answers

Summary of Contents for Allanson ColorMix ACL-SPI-EXT-Tx

  • Page 1 Dimensions (LxWxH): 3.0” x 1.8” x 0.88” **Please Note: In order for this unit to function, you must purchase the ACL-SPI-EXT-Tx requires an Allanson’s 12V DC or 24V DC class 2 power supply. ACL-SPI-EXT-Rx (Range Extender - Receiver) Its primary use is a Range Extender-Transmitter. This unit is compatible to use with...
  • Page 2 Note • Allanson Power supply CV12 or CV24 series should be used to match the 12VDC or 24VDC LED module/fixture rated operating voltage. • It’s recommended to use wire gauge AWG 24-18, solid or stranded, with a strip length of 6mm for the terminal block connections.

This manual is also suitable for:

Colormix acl-spi-ext-rx