Oricom TDD01 User Manual

User Manual
Model: TDD01
Valve stem adaptor
Slide valve Valve remover
Step 1: Attach Deflator to the
valve stem
Remove the valve cap from the Tyre's
valve stem. Push the slide valve forward,
screw the valve stem adaptor clockwise
onto the valve until it is firmly attached.
Step 3: Slide out to deflate, push
in to stop
Slide out slide valve to air down, push
forward slide valve to stop. Note:
Pressure gauge will not show correct
pressure during deflation.
Instructions
Step 2: Engage valve remover to
release valve
Push the valve remover in until it latches
in to the valve, turn anti-clockwise to
release the valve from the valve stem.
Air pressure will now push the valve
remover out and the tyre pressure will
now show on the digital gauge.
Step 4: Remove Deflator when
desired tyre pressure is reached
When the required pressure is reached,
push the valve remover in and turn
clockwise until the valve is screwed back
into the valve stem. You can now remove
the deflator by turning the valve stem
adaptor anti-clockwise to remove it from
the valve stem.