Advertisement
ExtremeStrip
INTERIOR LED LIGHT STRIPS
User Guide | Model: SEI-INTRLED8KITAU
IMPORTANT:
· Please read the User Guide before installation and use.
· The ExtremeStrip is compatible with the ECOXGEAR audio and
LED lighting EcoSystem, which includes LEDCast and EcoCast
Innovations. Look for the LEDCast and EcoCast logos on the
growing family of ECOXGEAR and SoundExtreme audio and
lighting solutions.
· The ExtremeStrip must be controlled by a SoundExtreme
product with LEDCast technology (sold separately).
· Do NOT make modifi cations to the product connectors.
· Do NOT connect this product to any other manufacturers'
LED controller.
WARNING:
· Connecting this product to any other manufacturer's product
may cause permanent damage to the product and shall void
the warranty.
· Do NOT overly bend the LED strips.
Advertisement
Table of Contents
Related Manuals for EcoxGear ExtremeStrip SEI-INTRLED8KITAU
Summary of Contents for EcoxGear ExtremeStrip SEI-INTRLED8KITAU
- Page 1 User Guide | Model: SEI-INTRLED8KITAU IMPORTANT: · Please read the User Guide before installation and use. · The ExtremeStrip is compatible with the ECOXGEAR audio and LED lighting EcoSystem, which includes LEDCast and EcoCast Innovations. Look for the LEDCast and EcoCast logos on the growing family of ECOXGEAR and SoundExtreme audio and lighting solutions.
- Page 2 ExtremeStrip Layout* 15.2cm LED Control Cable – 121.9cm long 15.2cm 15.2cm LED Strip – 15.2cm 6″ 20cm long 15.2cm 15.2cm Interconnection 15.2cm 15.2cm Cable – 182.8cm long *NOT TO SCALE...
-
Page 3: Mounting Instructions
Connections The ExtremeStrip LED strips come pre-connected by a 3-pin connector. If the strips are disconnected or if you want to rearrange the strips, please note that the strips are directional. (Additional strips sold separately). Arrows Must Face Away From the Controller IMPORTANT: When reconnecting the strips, verify that the arrows on each strip are facing the same direction AND ensure the arrows on the strip are facing away from the controller. -
Page 4: Wiring Instructions
2. The Interconnection Cable between two LED strip segments may be longer than the installation requires. Do NOT cut the cable and reconnect. Instead wrap the extra length on your vehicle and fasten the cable with the included zip ties. Please ensure the cable does NOT touch or drag on the ground AND is safely secured to prevent it from coming into contact with any moving parts. -
Page 5: Specifications
3. Once connected, you can change the ExtremeStrip lighting eff ects via the connected SoundExtreme product, which can be controlled by either a RF remote or the SoundExtreme smartphone app. Specifi cations Total Length 205.91 in (523 cm) Unit Weight 0.71 lbs (0.32 kg) Maximum Working Current 0.45A (12V Power Supply) -
Page 6: Fcc Statement
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.) This device may not cause harmful interference, and 2.) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifi... - Page 7 Warranty terms may be revised without notifi cation at the discretion of the manufacturer. Please visit www.soundextreme.com.au for additional product & warranty information. ExtremeStrip by SOUNDEXTREME. SOUNDEXTREME and ECOXGEAR are the registered trademark of Enfinity Pty Ltd Designed in Texas. Made in China.
-
Page 8: What's In The Box
What’s in the Box Screws Zip Ties (1x) LED strip – 20cm long + (1x) 6″ Connection Cable (3x) LED strips – 20cm long + (2x) 6″ Connection Cables Interconnection Cable – 182.8cm long LED Control Cable – 121.9cm long...
Need help?
Do you have a question about the ExtremeStrip SEI-INTRLED8KITAU and is the answer not in the manual?
Questions and answers