In order to comply with the LoRaWAN spec, Ezurio offers several different versions of the Sentrius Sensor. Regions covered include Europe (EU), North America (US) and Australia (AU915) and a growing number of countries in the Asia (AS) region.
Sentrius™ 4.1.1 Default AppEUI The default AppEUI is 0xec,0xc0,0x7a,0x00,0x00,0x00,0x00,0x06, and it is set in the device by Ezurio at the time of manufacturing. Note: Previous Ezurio default appEUI: F9C60ECEA3ADC6BD. Any sensor/sensor kit assembled after date code: 0223451 will contain the new appEUI.
RS1xx User Guide 4.2 DevEUI The DevEUI is an 8-byte ID used to uniquely identify your device. It is assigned and set in the device by Ezurio at the time of manufacturing. 4.2.1 Reading the DevEUI Back Label The DevEUI is printed on the back label of the sensor as...
Select the appropriate file to start the update process. The Test Versions and New Region button are for internal Ezurio use only. They are password protected so as to avoid incorrect use. Note: The sensor does not allow downgrading the firmware.
Ezurio materials or products for any specific or general uses. Ezurio or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Ezurio products are sold pursuant...
Need help?
Do you have a question about the Sentrius RS1 Series and is the answer not in the manual?
Questions and answers