Logitech Z213 Manual

KNOW YOUR PRODUCT

CONNECT THE SPEAKERS

1. Plug satellites cable into the subwoofer jack
   
2. Plug the power plug into an electrical outlet
   
3. Insert the 3 5 mm connector on the control pod into the audio jack on your device (e g, computer)
   
4. Power speakers on/off by sliding the power on/off button on the wired control pod
   

CONNECT YOUR HEADPHONES

To use headphones with your Z213 speakers, plug them into the headphone jack on the control pod
To change the volume of your headphones, adjust the volume from your audio input source
Note: The volume control on the control pod does not control the headphone volume

ADJUST THE VOLUME

Increase (or decrease) the speakers volume by rolling up
(or down) the wheel located on the control pod

ADJUST THE BASS

Adjust the bass level by turning the bass control knob located on the back of the subwoofer
Turn bass knob to the right for deeper bass or to the left for less bass

www.logitech.com/support/Z213