1. Manuals
  2. Brands
  3. ZERO GRAVITY Manuals
  4. Sports & Outdoors
  5. Ultima 5
  6. Assembly, installation, care, maintenance, and use instructions

ZERO GRAVITY Ultima 5 Assembly, Installation, Care, Maintenance, And Use Instructions

15ft x 10ft trampoline with enclosure
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Assembly, Installation, Care, Maintenance and Use Instructions
Zero Gravity Ultima 5 15ft x 10ft Trampoline with Enclosure
YOU MUST THOROUGHLY READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL
BEFORE ASSEMBLING AND USING THIS TRAMPOLINE.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
MAXIMUM WEIGHT OF USER MUST NOT EXCEED 286LB (130KG).
DO NOT ALLOW MORE THAN ONE PERSON ON THE TRAMPOLINE AT A TIME.
DO NOT ALLOW YOUNG CHILDREN TO USE UNLESS SUPERVISED BY AN ADULT.
THE TRAMPOLINE MUST NOT BE USED WITHOUT THE ENCLOSURE ERECTED.
FOR OUTDOOR DOMESTIC USE ONLY
Unit 19 Mayfield Avenue Industrial Park, Fyfield Road, Weyhill,
USER MANUAL
WARNING
Zero Gravity Trampolines
Hampshire, SP11 8HU, United Kingdom
For Customer Service, please call 01264 771247
www.ZeroGravityTrampolines.com
or visit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ultima 5 and is the answer not in the manual?

Questions and answers

Related Manuals for ZERO GRAVITY Ultima 5

Summary of Contents for ZERO GRAVITY Ultima 5

  • Page 1 Assembly, Installation, Care, Maintenance and Use Instructions Zero Gravity Ultima 5 15ft x 10ft Trampoline with Enclosure USER MANUAL WARNING  YOU MUST THOROUGHLY READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL BEFORE ASSEMBLING AND USING THIS TRAMPOLINE.  SAVE THIS MANUAL FOR FUTURE REFERENCE.
  • Page 2 No more than one user at a time. Maximum Do not perform somersaults or flips as weight 130kg/286lbs. paralysis or death can result if you land on your neck or head.   Do not use this Do not use this Remove all sharp or Do not allow trampoline if you...

  • Page 3: Table Of Contents

    Table of Contents Introduction ....................3 Before you start to assemble..............4 Before using the trampoline ..............4 Important Safety Instructions..............5 Parts List ....................10 Assembly Instructions ................14 Moving the Trampoline ................36 Care and Maintenance ................37 Instructions for use ..................

  • Page 4: Introduction

    Replacement parts produced by any other manufacturer may not have met the design and extensive safety testing standards used in the production of this Zero Gravity trampoline. As a result of this Zero Gravity Trampolines will not guarantee the performance and safety of the product when non genuine replacement parts are used. The use of non-genuine Zero Gravity replacement parts may affect any warranty claim on the product, as allowed by the law in your jurisdiction.

  • Page 5: Before You Start To Assemble

     Check the contents of your package against the parts list in this guide. If any parts are missing please contact your supplier or Zero Gravity Trampolines customer service for assistance.  If any parts are missing or damaged then do not erect or use the trampoline until replacement parts have been received.

  • Page 6: Important Safety Instructions

    Important Safety Instructions Carefully read these warnings before using this product. Failure to follow these warnings can result in serious injury or death.   The trampoline must not be used without the enclosure erected. The enclosure must be closed whilst the trampoline is in use.
  • Page 7  Use trampoline only with mature, knowledgeable adult supervision .  Do not attempt or allow somersaults. Landing on the head or neck can cause serious injury, paralysis, or death, even when landing in the middle of the mat.  Do not allow more than one person on the trampoline.
  • Page 8 When you land more than 1ft away from the edge of the Zero Gravity logo in the centre of the mat stop your jump immediately. Restart your jump at the centre of the mat.
  • Page 9  Remove all objects not designed for use with the trampoline from the trampoline before use. Do not let children take toys or other items onto the trampoline.  Do not eat while jumping.  Do not exit by a jump. ...
  • Page 10 Zero Gravity authorized replacement netting or pad is installed. Please refer to the Trampoline Net & Pad – Maintenance Requirements section contained in this manual for further detail.

  • Page 11: Parts List

    Parts List Part Number n i l Large Spring Lock Washer Self-Locking Screw Small Spring Lock Washer Spring Loading Tool e l l Trampoline Safety Instruction Placard Corner Top Frame Rail...
  • Page 12 Part Image Description Number Curved Top Rail with Leg Socket (Left) Curved Top Rail with Leg Socket (Right) Curved Top Rail with Leg Socket and Pole Socket (Left) Curved Top Rail with Leg Socket and Pole Socket (Right) Curved Top Rail with Pole Socket (Left) Curved Top Rail with Pole Socket (Right)
  • Page 13 Part Number Upper Frame Tube with Foam Lower Frame Tube with Foam Enclosure Pole Cap Enclosure Pole Cap Cover Self-Locking Screw Screw Lock Enclosure Safety Instruction Placard Cane Shaped Frame Tube Extension Frame Tube...
  • Page 14 Part Image Description Number Arc Washer Spring Lock Washer End Cap Ladder Safety Instruction Placard Cable Ties Curved Cable Wire M Curved Cable Wire N...

  • Page 15: Assembly Instructions

    Assembly Instructions STEP 1 – LAY OUT FRAME Top Rail Leg Base...
  • Page 16 STEP 2 - BUILD LEGS AND CONNECT TO TOP FRAME Note: Slot an L-shaped leg (Part 31) onto each end of straight top frame (Part 30) and secure with screws and washers using the tools provided.
  • Page 17 STEP 2 - BUILD LEGS AND CONNECT TO TOP FRAME (Continued) Note: Build the leg as pictured and slot this onto the end of the straight top frame and L-shaped leg. Secure with screws and washers using the tools provided. Do the same for the leg on the other end of the straight top frame.
  • Page 18 STEP 2 - BUILD LEGS AND CONNECT TO TOP FRAME (Continued) Completed look of legs...
  • Page 19 STEP 3- BUILD GROUND LEG...
  • Page 20 STEP 4 –ATTACH GROUND LEG AND CONNECT FRAME INTO RECTANGLE Note: Attach the ground leg to the frame along with the left and right curved top rail (Part 28 & 29) as pictured. Tip: The components may be stiff when trying to attach together, if so, try gently tapping them together with a hammer.
  • Page 21 STEP 5– LOOK OF COMPLETED FRAME Note: Check frame has been assembled correctly and that all components are aligned and legs are straight. Tip: Don’t worry if the components are loose or don’t hold together at this stage. Once the mat is fitted it will pull the frame together.

  • Page 22: Step 6 - Spring Assembly

    STEP 6 – SPRING ASSEMBLY Please note: It is important to follow these steps accurately as incorrectly installing the springs could damage the trampoline mattress and overstretch the springs. Place the trampoline mat flat on the ground inside the assembled frame with the warning labels and hem facing up.
  • Page 23 STEP 6 – SPRING ASSEMBLY (Continued) To ensure even tension on the mattress and springs you must continue to install springs at regular intervals and in opposite pairs as pictured. Next install the springs on each side of the mat as pictured. Start by installing springs in positions 1 and 2 then 3 and 4;...
  • Page 24 STEP 6 – SPRING ASSEMBLY (Continued) To ensure even tension on the mattress and springs you must continue to install springs at regular intervals and in opposite pairs as pictured. Install position 29 then 30; position 31 then 32; position 33 then 34; position 35 then 36. Hook on the Triangle-Ring TRIANGLE-RING...
  • Page 25 STEP 6 – SPRING ASSEMBLY (Continued) Now continue to install the rest of the springs in the remaining gaps in the pairs illustrated below.
  • Page 26 STEP 7 – FIT PADDING...
  • Page 27 STEP 8 – ATTACH LOWER FRAME TUBES Note: Slot lower frame tube into hole on the frame ensuring that it curves outwards as pictured. Secure with screw lock and washers using the tools provided. Repeat 7x for remaining lower frame tubes.
  • Page 28 STEP 9 – SECURE PADDING Tip: You can delay tying down the inner side of the padding until after you have secured the netting in step 14.
  • Page 29 STEP 10 – ASSEMBLE CABLE WIRES Note: Make up two even lengths of cable wire to form the long sides of the rectangle by combining 4 x Part C for each. Also make up two even lengths of cable wire to form the short sides of the rectangle by combining 1 x Part M and 1x Part N for each.
  • Page 30 STEP 11 – BUILD ENCLOSURE TOP RING Note: Lay out the enclosure netting and thread cable wires through sleeves. Ensure that opposite ends of cable wire meet in the corners so that they are able to be connected. Note: Connect rods at the corners using the tools provided.
  • Page 31 STEP 12 – ASSEMBLE UPPER FRAME TUBES Big hole Small hole Note: Repeat step 12 to assemble seven more upper frame tubes.
  • Page 32 STEP 12 – ASSEMBLE UPPER FRAME TUBES (Continued) Note: Attach the enclosure pole end cap on to the cable wire and then fit enclosure cap cover. Repeat this step for the remaining 7 poles.
  • Page 33 STEP 13 – ATTACH UPPER FRAME TUBES Note: Slide each of the upper frame tubes on to the lower frame tubes and secure with washers and screws using the tools provided. Tip: It may be easier if two people lift opposite tubes at the same time.
  • Page 34 STEP 14 – SECURE NETTING Enclosure Entrance Note: Ensure the zip is closed and hanging completely straight before proceeding. Start by tying a short cord in each corner and fastening each cord to a corresponding hole in the mat. Next, attach a long cord either side of the enclosure entrance in the same fashion. Ensure that the netting is pulled tight on all sides with no looseness or sagging before you continue.

  • Page 35: Step 15 - Ladder Assembly

    STEP 15 - LADDER ASSEMBLY L08  L01   L03  L06  L04  L05  L06  L07  L02  L08 ...
  • Page 36 STEP 16 – ATTACH LADDER TO TRAMPOLINE L11  Step 1  Step 2  Step 3  Step 4  Step 5  Step 6  Repeat this step to secure both sides of the ladder.

  • Page 37: Moving The Trampoline

    STEP 17 – ATTACH SAFETY PLACARDS L 09 Moving the Trampoline To move the trampoline we strongly recommend that the trampoline be disassembled and then reassembled in the new location. If however you only require the trampoline to be moved a short distance four people lifting is required.

  • Page 38: Care And Maintenance

    Schedule set out in these instructions. When the material shows any signs of weakness, you must stop using the trampoline immediately, properly store the trampoline and restrict access by users until replacement of the worn component is properly installed. Official Zero Gravity replacement parts can be purchased from our website: www.zerogravitytrampolines.com Maintenance Requirement for Trampoline Frame Check that legs are in a vertical position, all nuts and bolts are secured, and that all frame securing screws and bolts are in place.
  • Page 39 New enclosure netting and pads can be purchased through Zero Gravity Trampolines customer service or on our website www.ZeroGravityTrampolines.com...

  • Page 40: Instructions For Use

    Instructions for use Read and understand the instructions for use in this manual prior to using this product. Failure to do so can result in serious injury or death.　 Responsibilities of the user The key here is to stay in control of your jumps. DO NOT move onto more complicated, more difficult manoeuvres until you have mastered the basic, fundamental bounce.
  • Page 41  Do not use the trampoline while under the influence of alcohol or drugs.  Do not attempt to jump over the enclosure netting.  Do not intentionally rebound off the enclosure netting.  ALWAYS use the ladder to exit the trampoline. ...
  • Page 42  Check all coverings for burrs and sharp edges and replace affected parts if necessary.  Check for loose cords and gaps. Users may become entangled in or strangled by loose cords or in gaps between trampoline and enclosure.  Use trampoline only when the surface of the mat is dry.

  • Page 43: Fundamental Trampoline Skills

    Fundamental trampoline skills The following lessons are suggested in order to learn basic steps and bounces before moving onto more difficult, complicated bounces. Before actually getting on and using the trampoline, you should read and understand all safety instructions. A complete discussion and demonstration of body mechanics and trampoline guidelines should occur between the supervisor and student as well.
  • Page 44 BASIC TRAMPOLINE BOUNCES THE BASIC BOUNCE 1. Start from standing position, feet are shoulder width apart with head up and eyes on mat 2. Swing arms forward and up and around in a circular motion 3. Bring feet together while in mid-air and point toes downward 4.

  • Page 45: Product Warranty

    All replacement parts must be obtained from authorized Zero Gravity Trampoline agents. All decisions made by Zero Gravity Trampolines made in respect of the servicing of the equipment (including repairs, replacements or issues relating to defects of workmanship or materials) shall be conclusive and the Purchaser agrees to be bound by such decisions.
  • Page 46 ZERO GRAVITY TRAMPOLINES ARE NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES.

Table of Contents