Subscribe to Our Youtube Channel
Related Manuals for Redline READYSMOKE 95-0400
Summary of Contents for Redline READYSMOKE 95-0400
- Page 1 READYSMOKE™ OPERATION MANUAL REDLINE MODEL NO: 95-0400 Manufactured in California, USA...
-
Page 3: Table Of Contents
CONTENTS Specifications......Specifications..................1 Reference Guide......2 Components...................2 Safety..........Safety......................3 Accessories........Set up..........Accessories....................4 Testing for Leaks......Additional Accessories.................5 How to Diagnose Leaks: Set Up......................6 Intake System / Vacuum Leaks Hook up....................6 EVAP - Fuel Vapor Recovery ......System Leaks Testing for Leaks...................7 .... -
Page 4: Specifications
SPECIFICATIONS L x W x H 6” (15 cm) x 7” (18 cm) x 7” (18 cm) Weight 7.6 lbs (3.45 kgs) Shipping Weight 13.85 lbs (6.28 kgs) Power Supply 12 Volts DC Power Consumption 12 amps Output Pressure 0.5 PSI / 13.0 in. H20 / 0.032 BAR Operating Temperature 0°F to 140°F (-17°C to 60°C) Operating Humidity... -
Page 5: Components
COMPONENTS 1. Compound Pressure Gauge Indicates amount of pressure or vacuum Allows for Decay / Leak Down test to FRONT VIEW confirm repair is 100% complete 2. On/Off Switch 3. Power Indicator Light Green light indicates adequate power 4. Vapor Indicator 5. - Page 6 SAFETY The procedures in this operation manual are intended to be basic guidelines for users to practice using this ReadySmoke This operation manual is not intended to be used in place of common sense: • Use this equipment in the manner specified by the manufacturer •...
-
Page 7: Accessories Included
ACCESSORIES INCLUDED Vapor Producing Fluid 2 oz (60 ml) [PN 96-0074] Vapor Producing Fluid will perform over 200+ typical tests per bottle (includes 2 bottles) IMPORTANT: Contains NO Dye / Contaminants EVAP Service Tool Kit [PN 96-0003] Schrader Valve Removal Tool EVAP Service Port Adapter Daylight Spectrum LED Cordless Light [PN 96-001 HD/B]... -
Page 8: Accessories
OPTIONAL ACCESSORIES EasyEVAP™ [PN 95-0030] This universal Fuel Filler Neck Connector system fits 100% of vehicles to simplify EVAP testing Universal Filler Neck Connector [PN 95-0011] Made in USA of billet aluminum Sealing Disks [PN 96-0017] Creates an air-tight seal with any filler neck CapAdapt Capless Adaptor [PN 96-0054] ™... -
Page 9: Set Up
Connect Air Input Hose to a compressed air supply If necessary, replace Air Fitting to match your air supply In U.S., inert gas connection kits are available as optional accessory and either compressed air or inert gas may be used Contact Redline Detection for proper fitment applications... -
Page 10: Testing For Leaks
TESTING FOR LEAKS 4. PUSH ON / OFF SWITCH Begin a 5-minute vapor cycle VAPOR INDICATOR: Amber Light: Vapor is Generating Flashing Amber Light: Open Circuit, See Troubleshooting Section No Amber Light: No Vapor Generating Turn Flow Control Knob counter-clockwise to release vapor pressure Flow Meter indicates flow and measures leak size Use provided Halogen Inspection Light to locate leaks Perform repair(s) as needed... - Page 11 HOW TO DIAGNOSE INTAKE SYSTEM & VACUUM LEAKS This procedure will locate leaks in vacuum lines as well as manifolds, EGR valves, oil seals, gaskets, solenoids, o-rings, ducting, throttle shafts, diaphragms, canisters, and more For best results, test in a draft-free area 1.
- Page 12 HOW TO DIAGNOSE EVAP LEAKS Leaks in the EVAP system, or fuel vapor recovery system, are frequently the cause of check engine lights. Using ReadySmoke, these leaks can be quickly diagnosed and repaired, making them profitable services for repair facilities PRESSURE DECAY / LEAK DOWN TEST 1.
-
Page 13: Troubleshooting
Amber Light Flashing or Ensure 12-Volt battery is fully charged No Amber light Open Circuit / Internal component Contact Redline Detection Technical Support No Air Flow Check connection to compressed air Open circuit / internal component Contact Redline Detection Technical Support... -
Page 14: Warranty
Redline’s liability under this warranty is limited to the repair of any components or product which are determined to be defective. - Page 16 +1 714-451-1411 www.RedlineDetection.com Manufactured By Redline Detection, LLC MADE IN USA with global components 01-0091/A...
Need help?
Do you have a question about the READYSMOKE 95-0400 and is the answer not in the manual?
Questions and answers