imarflex IRS-620CW Quick Start Manual

1. Always set the temperature control knob to MIN before plugging in or unplugging the
power cord.
a. Do not remove the iron from the base yet.
b. Wait until the indicator lamp turns off, indicating readiness.
2. Remove the iron from the base station and begin ironing.
3. If you pause or stop, place the iron back on the base station.
a. The iron will automatically begin reheating.
NOTE: Cordless ironing is only possible for short periods. When performance
decreases, return the iron to the base to reheat. The indicator lamp will switch on
during heating and off when ready.
TABLE GUIDE:
CLEANING AND MAINTENANCE
1. Unplug the iron after every use.
2. Allow the iron to cool OFF.
3. Wipe the soleplate with soft damp cloth.
4. From time to time clean the water tank by filling it with water and shake well, and then
discard the water.
5. Never leave the water inside the water tank for long period of time.
SELF-CLEAN FUNCTION
1. Fill water through the water inlet (half-full). Press down the cover.
Plug into the convenience outlet. Make sure that the variable steam selector is in "o"
2.
position.
3. Set the thermostat control knob to max temperature, power light indicator will turn ON.
4. Once the power light indicator turns OFF, unplug the unit, bring to the sink and press
the SELF-CLEAN button. Water steam will come out from the soleplate holes while
impurities and flakes flushed out.
5. Release the button as soon as the water from the water tank evaporates.
REMINDER: Please do not forget to register your product warranty
through the warranty registration website at
https://imarflex.ph
Distributed By: Evergood Unlimited Corp.
901 G.Masangkay St., Manila
Made in China