Table of contents Table of contents General information..........................5 1.1 Symbols and signal words....................... 5 Safety instructions............................. 7 Features............................... 10 Connections and controls........................11 Technical specifications........................15 Protecting the environment......................17 Power Conditioner 12 Power Conditioner...
NOTICE! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Power Conditioner 12 Power Conditioner...
Page 6
General information Warning signs Type of danger Warning – high-voltage. Warning – danger zone. Power Conditioner 12 Power Conditioner...
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device when covers, safety equipment or optical components are missing or damaged. Power Conditioner 12 Power Conditioner...
Page 8
Never cover the device or the vents. Do not install the device in the immediate vicinity of other heat sources. Never operate the device in the immediate vicinity of naked flames. Power Conditioner 12 Power Conditioner...
Page 9
Never subject the device to liquids or moisture. Never move the device to another location while it is in operation. In environments with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by qualified specialists at reg‐ ular intervals to prevent damage due to overheating and other malfunctions. Power Conditioner 12 Power Conditioner...
Safety shutdown at 265 V Display of voltage and current values (switchable) USB interface for loading and operating mobile devices (no data exchange) Suitable for mounting in a 19” rack (2 RU) Mains power cable included Power Conditioner 12 Power Conditioner...
LINE VOLTAGE USB CHARGER CURRENT Power Conditioner 12 1 [I/O] | Main switch. Turns the device on and off. 2 [USB CHARGER] | USB-2.0 connection for charging and operating mobile devices. This port is not usable for data transmis‐ sion.
Page 12
4 ‘VOLTAGE RANGE’ | The indicator lights up green when the input voltage is in the normal range. (190 – 253 V ). The indicator flashes when the input voltage drops below 180 V . Power Conditioner 12 Power Conditioner...
Page 13
2 [16 A] | Reset button of the overload protection (16 A) of the Power-Twist-TR1 socket If the maximum total current load (16 A) is exceeded, the overload protection triggers and switches off the device. Press the reset button to deactivate the overload protection. Power Conditioner 12 Power Conditioner...
Page 14
4 [OUTLET 1]…[OUTLET 4] | Outputs for the power supply of further devices, designed as an outlet (type F) If the overload protection has tripped, turn the connected external devices off, deacti‐ vate the overload protection, and turn the connected external devices back on again. Power Conditioner 12 Power Conditioner...
50 Hz Installation properties 19”, 2 RU Dimensions (W × H × D) 483 mm × 88 mm × 400 mm Weight 15.7 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20%…80% (non-condensing) Power Conditioner 12 Power Conditioner...
Page 16
Technical specifications Further information Total load 16 A Lamp connection Voltage display Power Conditioner 12 Power Conditioner...
Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging. Observe the disposal note regarding documentation in France. Power Conditioner 12 Power Conditioner...
Page 18
Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal. For example, use the classified ads of Thomann GmbH. If your old device contains personal data, delete those data before disposing of it. Power Conditioner 12 Power Conditioner...
Need help?
Do you have a question about the Power Conditioner 12 and is the answer not in the manual?
Questions and answers