Table of Contents
Advertisement
2. Slide the
On/Off Lock switch to 'Off'. The unlock indicator will appear on the display.
3. Press the
Zone Button, the current Auto-Set Time Zone will flash. Press the
Reverse/Tuning Button and
The display will show each zone's current time setting. There are seven zones:
Auto-Set Time Zones
ATL : Atlantic Standard Time
EAS: Eastern Standard Time
CEN: Central Standard Time
MTN: Mountain Standard Time
PAC: Pacific Standard Time
ALS: Alaska Standard Time
HAI: Hawaii Standard Time
4. Press the
Enter Button.
Manual Time and Date Settings
1. To change the time setting, press the
Press the
Reverse/Tuning Button and
Hold a button for a few seconds to set the time rapidly. Be sure to set the correct AM/PM
time, shown by the PM indicator.
2. Press the
Enter Button. The clock will beep twice and the display will stop flashing.
3. Press the
Calendar Button. The current year setting will flash on lower right screen.
Press
Reverse/Tuning Button and
Calendar Button again. The current month/date will flash. Press
Button and
Daylight-Saving Time and Leap Year Adjustments
This unit will automatically adjust the clock at the beginning and end of Daylight-Saving Time
each year. It will also adjust the month/day display for leap year automatically.
This unit automatically advances one hour at the start of Daylight-Saving Time on the first
Sunday of April, and moves back one hour at the end of Daylight-Saving Time on the last
Sunday of October. If you live in an area that does not observe Daylight-Saving Time, it will
be necessary for you (except Hawaii zone) to manually adjust the clock back one hour at the
beginning of Daylight-Saving Time and forward one hour at the end of Daylight-Saving Time.
Programming the Preset Radio Stations
This unit has four Radio Preset Buttons to store local stations. It also includes 12 insert pictures
for the buttons, each showing a different radio station format (Jazz, Country, Rock, etc.). You will
need a list of four stations and their frequencies to program the settings.
1. Press the
Power Button to turn on the radio.
2. Select AM or FM band by pushing the
3. Press either the
station. Hold a button for a few seconds to scan the dial quickly.
Note: Extend the wire antenna for better FM reception.
4. Press and hold a Radio Preset Button to set the station. The unit will beep twice.
5. Remove the clear button cover from a Radio Preset Button, place the corresponding paper
insert into the clear cover.
6. Replace the clear cover.
• Repeat steps 3 through 6 for the remaining three Preset Buttons.
7. Slide the
On/Off Lock Switch to 'On'. Replace the top panel cover and tighten the screw
Notes:
¥ Keep the unit away from fluorescent lamps as they may cause interference to the radio.
• The two buttons on the right end are
Forward/Tuning Button to adjust then press the
Reverse/Tuning Button or
Forward/Tuning Button to select your time zone.
Time Set Button. The clock display will flash.
Forward/Tuning Button to set the time.
Forward/Tuning Button to adjust. Press
Radio Band Button to AM or FM.
Forward/Tuning Button to find the
MP-3/Aux Line-in and
3
Reverse/Tuning
Enter Button to exit.
CD Play/Pause Button
Advertisement
Table of Contents
