Related Manuals for Bluebell BC862
Summary of Contents for Bluebell BC862
- Page 1 OPERATIONS MANUAL BC862 2 x Ethernet Fibre © 2017 Bluebell Opticom Ltd Unit 2, The Quadrant, Howarth Road, Maidenhead, Berkshire, SL6 1AP, United Kingdom Tel: +44 (0)1628 510055 Fax: +44 (0)1628 510057 Email: sales@bluebell.tv Website: www.bluebell.tv...
- Page 2 The technical descriptions and schematics are to aid service and repair only. Dissemination to a third party or parties will constitute breach of copyright. Information in this document is subject to change without notice and does not represent a commitment on the part of Bluebell Opticom Ltd. E&OE April 2017 BC862-OpsManual-iss1.doc...
- Page 3 � � • • Bluebell Opticom Ltd provides warranty coverage as detailed in our general terms and conditions. Please note that warranty support is only valid if product serial numbers remain intact and legible. Tampering with or removing serial numbers may void your warranty.
-
Page 4: Block Diagram
BM102 network card. For stand alone applications the BC862 can be housed in an individual rugged enclosure. The BC862 may form one end of a fibre link using other cards of the BC800 Series at the other end as follows: BC800 –... - Page 5 Card Panel BC862 Twisted Pair LED GRN = 1Gbps signal on Port 1 or 2 or both. OFF = No signal or 10/100Mbps on PORT 1 and 2 GRN = Card has power Fibre Optic LED GRN = OPT I/O set to 1Gbps...
-
Page 6: Specifications
Specifications BC862 Electrical Input/Output Connectors 2 x RJ45 Format 10/100/1000Base-T half/full duplex auto- negotiation Standard IEEE 802.3 802.3 10 Base-T 802.3u 100 Base-T 802.3ab 1000 Base-T Optical Input/Output Specs determined by SFP fitted. Some typical values are given here Connectors... - Page 7 Configuration BC862 These unit configurations can be set by using jumper links to link 2 adjacent pins. Selection of SFP type for monitoring purposes Link pins 1 to 2 for MSA type SFP (Data) (Default). Link pins 2 to 3 for Non-MSA type SFP (Video) No link will disable SFP monitoring.
- Page 8 Monitoring BC862 External monitoring When fitted in a BC100 or BC160 frame, the BC862 reports its status as follows. BC100/BC160 Frame Panel LEDs: Ch A: green = 1 Gbps data rate detected at either RJ45 port. = 10/100 Mbps detected or no connection at both RJ45 ports.
-
Page 9: Ordering Information
BC862S/15/13 Converter Cards (1550nm). Dual Port. Used in conjunction with BC860/S/13/15 as a matched pair. All SFPs supplied by Bluebell will have LC connectors. SFP Options SFPs fitted to these modules must have the following characteristics: • The SFP must be a transceiver.
Need help?
Do you have a question about the BC862 and is the answer not in the manual?
Questions and answers