Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ESPEN EVC2RT
- Page 1 EspenEV.com EVC2RT RESIDENTIAL LEVEL 2 EV CHARGER INSTALLATION AND USER GUIDE...
-
Page 2: Table Of Contents
This product must be connected to a grounded, metal, permanent wiring system, 9.Certificates or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product. 10.Maintenance and Repair 11.Service Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... -
Page 3: Safety Information
-22°F to 122°F (-30°C to 50°C). • Use 105°C wire, 6 AWG copper for setting 48A rating intended for field wiring connection. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... -
Page 4: Specifications
› ETL Li sted Safety R FI D › Yes 4G module › Optional War r anty › 2 yea rs limited product warranty 8pcs Drywallanchors 8pcs 7/32 inch #12 Phillips screws 2pcs M4X8 hand-screws Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... -
Page 5: Required Tools
Apple Store or Google Play, create account and begin the setup process. Phillips, flathead and Pencil torx screwdrivers Adjustable wrench IOS or Android phone Drill with a 5/16" drill bit or tablet Allen Wrench Bubble level Rubber Mallet Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... -
Page 6: Step 2: Powering The Ev Charger
National Electrical Code, ANSI/NFPA 70, the CSA C22.1-15 Canadian Electrical. Code, Part 1 (Canada) or NOM-001-SEDE Electrical installations (Utility) (Mexico) or ANSI NFPA 70 National Electrical Code (USA) Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... -
Page 7: Step 4: Mark The Mounting Bracket Location
Use a Rubber Mallet to tap in the 6 Use the 2 provided M4X8 drywall anchors. Thumb-screws to install the EV Charger onto the mounting bracket • Install the bracket with 6 Phillips screws into the anchors. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... - Page 8 Charger. To remove the cable, gently grab the wiring harness and pull away from the circuit board. Ethernet Cable as shown Take care not to damage the connector or circuit board. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com...
- Page 9 GND and secure them with the screws, applying a tightening torque of 1.2 Nm. Pull out the plug from of the middle waterproof connector, insert the Ethernet cable, and tighten the nut. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com...
- Page 10 First, turn o the dedicated dual-pole breaker that will power the EV Charger. Turn on the breaker and ensure that the power light on the front of the EV Charger is illuminated. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com...
- Page 11 Bring leads from both phases of the breaker along with a ground/earth lead to the Bring leads from both phases of the breaker along with a ground/earth lead to the outlet and connect them. Neutral is not required. outlet and connect them. Neutral is not required. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com...
-
Page 12: Step 9: Complete Setup
Click ‘My Account’ to review the email size and to take advantage of the numerous other features and change ‘Name’. through APP, follow the corresponding steps in Step 10, SimplyEV APP settings. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... - Page 13 Firmware Update: update available when Wifi is connected. Connectivity: When Wifi setting is required to be changed, click ‘Connectivity’ to reconfigurate Wifi network. *Connect with EV charger via Bluetooth before Wifi reconfiguration. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com...
- Page 14 Rename the EV charger: click the Click ‘Stop’ to cease the charging. ‘rename’ icon. Type desired name The status of EV charger changes and click press OK. from ‘Charging’ to ‘Finished’, EV charger stops charging. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com...
- Page 15 Click ‘SAVE’ to save the schedule Click ‘save’. setting. Fill the other periods for peak and o -peak electricity rates. Charging schedule is successfully added. Click ‘Monthly Statistics’ to check the charging data and history. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com...
-
Page 16: Charging Your Vehicle
Do not attempt to drive your vehicle while the charge cable is connected to your vehicle. CAUTION: Do not touch or use this product in the event of failure. Disconnect the power supply and consult a qualified professional for service. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... -
Page 17: Troubleshooting Tips
If issue persists, contact Support. Red light flashing every 3 CP line not properly connected. seconds (seven times) Red light flashing every 3 Relay fused in position seconds (eight times) Disconnect from power immediately. Contact Support. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... -
Page 18: Certificates
To ensure compliance, operations at closer than this distance is not recommended. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Espen EV - www.EspenEV.com Espen EV - www.EspenEV.com... -
Page 19: Service
MAINTENANCE AND REPAIR Need more assistance? Contact Espen EV Customer Service: (562) 529-2938 (Monday - Friday 09:00 - 17:00 PST) info@espenev.com https://espenev.com/contact/ Espen EV - www.EspenEV.com...
Need help?
Do you have a question about the EVC2RT and is the answer not in the manual?
Questions and answers