Support ................36 Table of Contents Using Parental Controls...........37 Reset to Factory Default ..........37 Safety Information .............2 Entertainment ..............37 Introduction ................4 Game ................37 High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG) 4 Sports ................38 Stand Installation & Wall Mounting ........4 Media ................38 Antenna Connection ............4 Play Background Music while Viewing Pictures ....38 Other Connections.............5...
• Do not expose the TV to direct sunlight or do Safety Information not place open flames such as lit candles on the top of or near the TV. • Do not place any heat sources such as CAUTION electric heaters, radiators, etc. near the TV set. •...
Page 4
Class 1 Laser Product: This If the existing television set is going to be retained and product contains Class 1 laser relocated, the same considerations as above should CLASS 1 source that is safe under rea- be applied. LASER PRODUCT –...
your local dealer to purchase the recommended wall- Introduction hanging bracket. Thank you for choosing our product. You’ll soon be Antenna Connection enjoying your new TV. Please read these instructions carefully. They contain important information which will Connect the aerial or cable TV plug to the aerial input help you get the best from your TV and ensure safe (ANT) socket or satellite plug to the satellite input (LNB) and correct installation and operation.
Other Connections If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making any connection. After the connection is done, you can turn on the units and use them. When using the wall mounting kit Connector Type...
Turning On/Off the TV(**) Turning On/Off the TV(**) Connect power Connect power IMPORTANT: The TV set is designed to operate on IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket. 220-240V AC, 50 Hz socket. After unpacking, allow the TV set to reach the ambient After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the...
application, etc. Press Back/Return to return to the TV Control & Operation(**) previous menu screen. Input Selection Once you have connected external systems to your TV, you can switch to different input sources. Press the Source button on your remote control consecutively to select the different sources.
Page 9
options menu and then press the button consecutively to move the focus to CH+ or CH- option. To change input source: Press the control button to display the function options menu, the focus will be on the current input source option. Scroll through the available input sources by pressing the button until the desired input source option is highlighted.
Page 10
Remote Control Standby: Switches On / Off the TV Source: Shows available broadcast and content sources Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen Language: Switches among sound modes (an- alogue TV), displays and changes audio/subtitle language and turns subtitles on or off (digital TV, where available)
Use the Navigation Bar First-Time Use The navigation bar refers to indicators and icons on the left side of the Home screen. Using the E-Manual Note: View the embedded E-Manual that contains information • Indicators or icons may vary depending on models/countries/ about your TV’s key features. regions.
Live TV: Provides quick access to Live TV. For more information, please refer to First-Time Use>Prepare Live TV in this manual. Guide: Provides quick access to Guide. For more information, please refer to Enjoy Live TV>Programme Guide (EPG) in this manual. Use the shortcuts You can add inputs, channels and websites to the Home screen to have quick access to them for your...
Broadband ISP connection ● After the network is connected, press the Home button on your remote control and select the To get access to the Internet using a wireless Account icon in the navigation bar on the Home connection, press the Home button on your screen.
the sorting takes place according to the criteria of the Note: local cable network operator. • Some input sources cannot be renamed. Search by Channel name Using the TV Voice Service Press the Menu button and select the Channel Search Select Voice Service on the TV step to search within Live TV.
Select the item you want to move, then long press the How can TV channels and apps be OK button to select Sort, use the D-pad to move it, customised? and press the OK button to store position. TV channels Note: Some Apps cannot be moved.
Aerial • Frequency: Input the channel frequency you want. • Channel: Select from All Channels or Free • Picture System: Select the Colour System. Channels. This option may not be available • Sound System: Select the Sound System. depending on countries/regions/operators. Live Menu •...
• Subtitle Move the focus to an item you want to edit, press the OK button on the remote control, and use the Turn on Subtitle function or select subtitle option for directional button to move it. Press the OK button digital broadcast content.
• PVR button Edit Favourite Channel List • Next programme Before you can edit the favourite list, Channel Scan Note: must be completed first. • The remote control buttons may vary depending on models/ Add a channel to a favourite list countries/regions. You can add channels from various reception types to the favourite list.
• 24h+ • After programming the TV to record digital broadcasting, do not disconnect the power plug In Guide (EPG), press the Blue button to select before recording starts. programmes of the next day. • If video or audio recording fail due to malfunction •...
• Recording time • This function may not be applicable in some models/ countries/regions. • Total time Manage schedule recording list • Rewind button In Live TV, press the Menu button on your remote • Pause / Play button control and select More>Recording List>Scheduled. •...
Shift. function could lead to copyright infringement of Initialise the external USB disk to support PVR and authors' rights. Toshiba asks you to respect the Time-Shift. When you connect more than one USB intellectual property rights of third parties. storage device to the TV, the one selected in PVR...
You can add padding time to start recording before the time installation process, it will directly guide you to event starts, or after the event has finished by delaying the Set Up Alexa steps. the end of recording depending on how much Padding ●...
Page 23
• Press the Home button and select the Settings icon • Follow the instructions in the app to link your VIDAA and select System>Voice Service. account signed in on your TV to your Google Account. When VIDAA Voice is selected as your voice assistant, select the language of VIDAA Voice in the Voice Google Smart Home Service is set up and ready.
• Make sure your TV and Alexa-enabled devices/ If your remote control supports voice function,press Google Home devices are connected to the same and hold the Microphone button and use your voice network environment. to search for the app you are looking for. Note: If your TV supports the hands-free wake-up function, you could also search the app with your voice directly.
• The app you have selected will be uninstalled, but does have Edit button, you can customise this button you could still install it again from the app store. to launch VIDAA Kids directly from the remote control. Note: Note: • Some apps cannot be uninstalled.
• Open the mobile app and select the TV device you Using the Browser to Search the want to connect. Internet What you can do with the app: Press the Home button on your remote control, and • Turn the TV on or off select Browser.
Press the Home button on your remote control and Control the TV with a Keyboard, Mouse or select Settings>Connection>HDMI & CEC. Gamepad Connect an external device through HDMI & CEC Connect a keyboard, mouse or gamepad to control function your TV with ease. Press the Home button on your remote control and Connect a USB keyboard, mouse or gamepad select Settings>Connection>HDMI &...
• Only one Bluetooth speaker or pair of Bluetooth headphones Screen Sharing can be connected to the TV. If a new Bluetooth speaker or pair of headphones connects to the TV, the existing one will Before using the feature, please set your TV to the be disconnected automatically. wireless network connection. • Some compatibility issues may occur depending on the Press the Source button on your remote control and Bluetooth device support. select Screen Sharing. • Bluetooth keyboards may not be functional with some •...
Always Agree: Select Always Agree to set your ● Press the Input button on your remote control device as a trusted device, and there will no pop- and select AirPlay, enter AirPlay and HomeKit up from the second time. Settings and set AirPlay to On. Agree: Select Agree and TV will play the content Locate the AirPlay icon on supported media apps, or sharing from the device.
Devices>Connecting Audio Visual (AV) Devices • Recorded programmes saved on the USB storage device can only be viewed on this TV. They cannot be viewed when in this manual. connected to another TV (including the same model of TV), When the connection is completed, turn on your TV and a PC, or other devices. Set Top Box, switch to the input source by pressing the • You cannot watch one channel while recording another. Home button, then select the Input icon on the Home • If the recording time to the USB storage device is too short, screen or press the Source button to change to the no data may be saved.
• Power on the sound system. • If there is no sound from your TV, change the PC's audio settings. • Press the Home button and select the Settings icon • If you want to connect your PC and TV wirelessly, please on the Home screen. refer to Connecting to External Devices>Content Sharing • Select Sound>Audio Output, and choose ARC or Connecting to External Devices>Screen Sharing in option.
Page 32
to the amount of ambient light in your room when Picture Mode Settings Setup Automatic Light Sensor is On. Press the Home button on your remote control and Light Sensor Shift: This feature is adjustable only select Settings>Picture>Picture Mode Settings. when Automatic Light Sensor is turned on.
Motion • If the aspect ratio of the selected format is different from the TV transmission or video content, it can distort the picture. Ultra Smooth Motion: Reduce the afterimage effect • When connecting a PC to the TV via HDMI input, fast moving when viewing fast-moving objects. images may become distorted. Clear Motion: Reduce judder and blur from video content. Sound High Refresh Rate Mode: Activate the high refresh Adjust sound mode and other advanced sound rate mode for smoother video while gaming.
Page 34
Dialogue Clarity: Dialogue Clarity uses DTS Dialog Turn on Bleetooth at the Home>Settings>Connec- Clarity™ to boost the frequency range of the human tion>Bluetooth. voice so dialogue is clearly understood and heard Pair your Bluetooth headphones with the TV. above audio or surround effects. Press the Home button on your remote control to This function may not be applicable in some models/ select Settings>Sound>Audio Output to choose...
Dolby Audio - Dolby Digital Plus: the audio device Test the current network connection status and view outputs Dolby Digital Plus audio. the current network information. DTS Surround: The audio device output DTS audio. Connection Test Due to the differences between different models, Press the Home button on your remote control and select Settings>Connection>...
• Enabling this function may result in higher energy Set Language and Location consumption. Press the Home button on your remote control and • This function may not be applicable in some models/ select Settings>System>Language and Location. countries/regions. Select the language used for this TV and your location. System Location: Choose the location from where you will watch your TV.
Power On Mode Store Mode Press the Home button on your remote control and Select Store Mode to setup the TV in a retail setting. select Settings>System>Advanced Settings>Power This mode enables E-Pos and other demo functions On Mode. and is only intended for use in retail stores. When Store Mode is selected, press the Menu button The TV will turn on in the selected mode when the main power is reconnected.
Please ensure your TV is connected to the Internet. Locks Check OAD Upgrade: Check to ensure that your TV Turn on Locks to enable the Parental Control function. has received the latest firmware via the tuner. You will see other Parental Control settings change Note: from a greyed out state to highlighted.
By default, there is Content Sharing displayed on the Game Mode Media screen. If your mobile device is connected to Press the Home button on your remote control and the TV, its name also appears on the Media screen. select Settings>Picture>Game Settings>Game For more information about Content Sharing, please Mode.
Audio Format Due to differences in programming tools and other factors, some of the file formats that are listed may not be supported. The listed formats may not be supported depending on the model. Container Audio Codec File Extension Name Mpeg1/2 Layer1 .wav Mpeg1/2 Layer2...
Video Format Due to differences in programming tools and other factors, some of the file formats that are listed may not be supported. The listed formats may not be supported depending on the model. Resolution and Frame Container Video Codec File Extension Name Rate MPEG...
Note: The above functions may not be applicable in some Accessibility Features models/countries/regions. Menu Transparency Subtitle Setup Press the Home button on your remote control and Adjust Subtitle Settings for digital broadcast content. select Settings>Accessibility>Menu Transparency. Press the Home button on your remote control and Select menu transparency from Off, Medium, High.
Please listen to the sound carefully to check whether ● Select Agree All and Confirm in End User Licence you can hear the sound problem. Agreement page. Network Related Self-diagnosis ● Select Generate PIN in Remote Control Service. Network Connection Status: View the TV’s network ●...
• Press the Home button on your remote control • The compressed video may cause picture distortion, especially for the fast moving pictures from sports and select Settings>Sound>Audio Output programmes and action movies. Settings>Lip Sync. Adjust the value as you desire. There are dots, horizontal or vertical lines on •...
on the remote control. Please wait a while for the • Some channels may not have subtitle data. In this case, even if you turn on the subtitle function, subtitles are not TV to start up fully. provided on the TV screen. • If the problem persists, restart your TV. The channel list sorting is lost after several days, or previously deleted channels return in the Channel and Broadcast Issues...
power off these wireless devices or keep them away • See Number 1,2 in Common solutions to app issues. from the TV. The app language is different from the TV 6. Restart your modem/router. Power off your modem/ menu language router and power it on again after at least 60 seconds.
Please use a HDMI cable of standard specification The TV cannot be connected to my soundbar, and make sure the cable is not damaged. Bluetooth wireless headphones, or speaker • Check if the Bluetooth device is compatible with External Device Connection Issues the TV.
• Please say your command and wait for the device I want to turn the TV and external device off or to respond. on at the same time • When the TV is connected to external devices, the • Confirm that the external device is HDMI & CEC com- performance of the voice service may be affected.
Page 49
the TV to display the on-screen menu, and press The TV automatically turns on or off by itself, the button again to move the focus to Power off to or the TV cannot be turned on or off turn off the TV. When the TV is performing certain operations, such •...
To delete account usage data Country Restriction Press the Home button on your remote control Russian Indoor use only and select Settings>Support>Disclaimer and Federation Privacy>Remove User Data. The requirements for any country may change at any Note: time. It’s recommended that user checks with local authorities for the current status of their national reg- • This setting will completely delete your usage data (including account, Live TV favourite channel list, Bluetooth equipment...
Page 51
such technology outside of this product is prohibited without a licence from Microsoft or an authorised Microsoft subsidiary. (**)The Bluetooth word mark and logos are registered ® trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Vestel Elektronik Sanayi ve Ticaret A.S.
Disposal Information The following information is only for EU-member states: Disposal of products The crossed out wheeIed dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres.
Restriction of Chemicals), entered into force on 1 June 2007. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.
Need help?
Do you have a question about the 24 LV2F Series and is the answer not in the manual?
Questions and answers