Advertisement
Quick Links
STOOLS MODELS
6200
SERIES
STOOL COMPONENTS
A
Backrest x1
C
Mounting
Plate x1
Dear Customer, Thank you for your purchase. Although extreme care goes into manufacturing & packaging of
this product, mistakes are possible. If you encounter any missing parts or di culty in assembly, please contact
our customer service Toll Free at 1-800-261-4112 or info@nationalpublicseating.com for courteous & immediate
resolution to your problem.
Page 1 of 2
ASSEMBLY INSTRUCTIONS
SCIENCE STOOLS - (6200, 6300, 6400 SERIES)
BACKREST INSTALLATION
6300
6400
SERIES
SERIES
Backrest
B
Arm x1
Seat x1
D
www.nationalpublicseating.com
INCLUDED HARDWARE
1
4x Hex Flange
Phillips Screw
4
5
1x Spring Lock
Washer
TOOLS FOR ASSEMBLY
7
Allen Wrench
9
Phillips Screw
Driver
1
Turn Stool upside down onto
an elevated flat sturdy surface.
Identify the four center holes
closest to the X (Where Legs
cross).
2
3
1x Bolt
1x Star Knob
6
1x Washer
1x Screw
8
Pliers
10
Drill
1-800-261-4112
Advertisement
Summary of Contents for NPS 6200 Series
- Page 1 ASSEMBLY INSTRUCTIONS SCIENCE STOOLS - (6200, 6300, 6400 SERIES) BACKREST INSTALLATION STOOLS MODELS INCLUDED HARDWARE 4x Hex Flange 1x Bolt 1x Star Knob Phillips Screw 6200 6300 6400 SERIES SERIES SERIES 1x Spring Lock 1x Washer 1x Screw Washer STOOL COMPONENTS TOOLS FOR ASSEMBLY Backrest x1 Allen Wrench...
- Page 2 Place the Mounting Plate flat Use the supplied Allen side down on the point where Wrench to loosen the Black the bars cross, align the four Screw located on top of holes and drive the four Hex Mounting Plate Flange Phillips Screws Insert the Backrest Arm with through Mounting Plate...
- Page 3 ASSEMBLY INSTRUCTIONS SCIENCE STOOLS - (6200, 6300, 6400 SERIES) ADJUSTABLE HEIGHT LEG INSTALLATION STOOLS MODELS INCLUDED HARDWARE 4x Screws TOOLS FOR ASSEMBLY 6200 6300 6400 SERIES SERIES SERIES Drill Allen Wrench Pliers Remove the Glides: Put your STOOL COMPONENTS feet together on the Leg right on top the Glide and pull the Stool.
- Page 4 If you are unable to perform With the Stool on a sturdy the previous movement: surface, insert each Adjustable Turn Stool upside down on a Height Leg into each Leg of flat surface and using Pliers the Stool. Align the hole in the apply a firm grip to Plastic Leg with the desired height.
Need help?
Do you have a question about the 6200 Series and is the answer not in the manual?
Questions and answers