Advertisement

Quick Links

E101-C6WN8 Series
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E101-C6WN8 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Ebyte E101-C6WN8 Series

  • Page 1 E101-C6WN8 Series User Manual...
  • Page 2: Table Of Contents

    6.1 Reflow soldering temperature ............................13 6.2 Reflow soldering curve ...............................14 7. Packing ....................................... 15 7.1 E101-C6WN8-PS packaging method ..........................15 7.2 E101-C6WN8-XS packaging method..........................16 8. Disclaimer ......................................17 Revise history ......................................17 About Us ................................错误!未定义书签。 Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 3: Disclaimer And Copyright Notice

    Due to product version upgrades or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any hint or notice. This manual is only used as a guide. Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 4: Functional Overview

     Support three role interchanges of AP, STA and AP+STA;  Support serial communication and flow control. The baud rate supports up to 128000 ;  Support automatic and manual networking ;  Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 5: Electrical Characteristics

    Working channel center frequency range 2412~2484MHz 2412~2484MHz Wi-Fi Protocol IEEE802.11b/g/n Protocol IEEE802.11b/g/n Antenna type PCB antenna Rubber antenna With router @Mercury 300m​ 260 m Distance MW305R between modules 300m​ 260 m Chart 1- 5 RF Characteristics Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 6: Hardware Description

    Chengdu Ebyte Electronic Technology Co., Ltd. ESP32-C6-WROOM User Manual 3. Hardware Description 3.1 Functional block diagram Figure 1 E101-C6WN8-PS functional block diagram Figure 2 E101-C6WN8-XS functional block diagram Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 7: E101-C6Wn8-Ps & E101-C6Wn8-Xs Pin Definition

    MTDI, GPIO5, LP_GPIO5, LP_UART_TXD, ADC1_CH5, FSPIWP I/O/T MTCK, GPIO6, LP_GPIO6, LP_I2C_SDA, ADC1_CH6, FSPICLK I/O/T MTDO, GPIO7, LP_GPIO7, LP_I2C_SCL, FSPID I/O/T GPIO0, XTAL_32K_P, LP_GPIO0, LP_UART_DTRN, ADC1_CH0 I/O/T GPIO1, XTAL_32K_N, LP_GPIO1, LP_UART_DSRN, ADC1_CH1 I/O/T GPIO8 Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 8: Recommended Schematic Diagram

    EPAD Ground 1 P: power supply; I: input; O: output; T: can be set to high impedance. Chart 2 - 2 pin definition list 3.3 Recommended schematic diagram Figure - Recommended schematic diagram Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 9: Module Size

    Chengdu Ebyte Electronic Technology Co., Ltd. ESP32-C6-WROOM User Manual 3.4 Module size 3.4.1 E101-C6WN8-PS dimension drawing Chart 2- 4 module dimensions 3.4.2 E101-C6WN8-XS Dimensional Drawing Chart 2- 5 module dimensions Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 10: Pcb Packaging Graphics

    Chengdu Ebyte Electronic Technology Co., Ltd. ESP32-C6-WROOM User Manual 3.5 PCB packaging graphics 3.5.1 E101-C6WN8-PS Chart 2 - 6 PCB packaging Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 11: E101-C6Wn8-Xs

    Chengdu Ebyte Electronic Technology Co., Ltd. ESP32-C6-WROOM User Manual 3.5.2 E101-C6WN8-XS Chart2 - 7 PCB packaging Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 12: External Antenna Connector Dimensions

    Chengdu Ebyte Electronic Technology Co., Ltd. ESP32-C6-WROOM User Manual 3.6 External antenna connector dimensions Chart 2- 8 External antenna connector dimensions Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 13: At Commands

    The clock waveform on the UART is not standard, check whether there is interference on the UART line;  Unsatisfactory power supply may also cause garbled code, so be sure to ensure the reliability of the power supply;  Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 14: Welding Operation Guidance

    6℃/second, maximum 6℃/second, maximum Time from room temperature to peak 6 minutes, maximum 8 minutes, maximum temperature ※The peak temperature (Tp) tolerance definition of the temperature curve is the upper limit of the user Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 15: Reflow Soldering Curve

    Chengdu Ebyte Electronic Technology Co., Ltd. ESP32-C6-WROOM User Manual 6.2 Reflow soldering curve Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 16: Packing

    Chengdu Ebyte Electronic Technology Co., Ltd. ESP32-C6-WROOM User Manual 7. Packing 7.1 E101-C6WN8-PS packaging method Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 17: E101-C6Wn8-Xs Packaging Method

    Chengdu Ebyte Electronic Technology Co., Ltd. ESP32-C6-WROOM User Manual 7.2 E101-C6WN8-XS packaging method Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.
  • Page 18: Disclaimer

    Documents and RF Setting download link: https://www.es-ebyte.com Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com Address: Building B5, Mould Industrial Park, 199# Xiqu Ave, High-tech Zone, Chengdu, 611731, Sichuan, China Copyright ©2012–2024,Chengdu Ebyte Electronic Technology Co., Ltd.

Table of Contents