1. Manuals
  2. Brands
  3. Strong Manuals
  4. Controller
  5. StrongLumio 467133
  6. User instructions

Strong StrongLumio 467133 User Instructions

Driver for kinetic self powered switch
Hide thumbs

Advertisement

Table of Contents

467133 StrongLumio driver for kinetic
self powered switch
EN user instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StrongLumio 467133 and is the answer not in the manual?

Questions and answers

Related Manuals for Strong StrongLumio 467133

Summary of Contents for Strong StrongLumio 467133

  • Page 1 467133 StrongLumio driver for kinetic self powered switch EN user instructions...

  • Page 2: Product Parameters

    Introduction 467133 dimming receiver controller can pair with kinetic switch to control light on/off/dimming. The 467133 has WiFi module, so can use mobile APP to remote control, and Amazon Alexa voice control. Screw hole Pairing key Indicator light Terminals Screw hole of Screw hole of upper cover upper cover...

  • Page 3: Connection And Installation

    Connection and installation Lamp supporting reverse phase dimming Installation method 1: Paste with Installation method 2: Fix into e double-sided adhesive tape on xpansion screw in the wall clean surface...
  • Page 4 Instruction for dimming function: 1. This device can send a regulated 12-24V signal to control light sources such as incandescent bulbs and especially LED lights. In case of flickering during regulation, it is necessary to replace the luminaire with another one that supports the dimming function. Normally step dimmers and lamps with their own dimmers are not supported.

  • Page 5: Combination Method

    Long press dimming, if this time is brighten direction, release and long press again within 1 second, it will change to dim direction. Long press dimming, if this time is dim direction, release and longpress again within 1 second, it will change to brighten direction.
  • Page 6 Ordinary Paring Method 1.Connect the controller's input to the power supply, press the controller “pairing key” around 3 seconds, release when indicator light flash slowly(flash 1 time per second). 2.Press the selected kinetic energy switch once (Do not press several times continuously), then indicator light is off, meansthe paring is successful.
  • Page 7 Directional pairing In order to meet the user's usage habit of switch and to ensure the synchronization of one control multi mode, so we define the directional pairing mode. Directional paring only support 2 keys or 6 keys push button switch. 1.Connect the controller's input to the power supply, press the controller “pairing key”...

  • Page 8: App Download

    Clear pairing 1. If you need to clear paring of switch and controller, long press the controller “pairing key” for around 12 seconds, the indicator light will flash from slowly - quickly - stay still - off. After indicator light is off, which means that all paired switch information is cleared.
  • Page 9 Conect WIFI method 1.Use your mobile phone to download APP and follow the prompts to register your account in the APP. 2.Power on the controller, and confirm the indicator light is flash quickly(twice per second).If the indicator light is not flash quickly, keep pressing the “pairing key”...
  • Page 10 ECHO 1.In the Kinetic Switch APP, rename the controller devices, such as bedroom lights. 2.Add the sklil SmartLife in Alexa App, and log in by using the account and password of the Kinetic Switch App. 3.Discover the device in the smart application selection in the Alexa app.

  • Page 11: Troubleshooting

    Troubleshooting 1.Wifi failed internet pairing Troubleshooting method: It may be the router connections quantity reaches the upper limit. Common router can connect maximum 15 pcs devices, please upgrade router and close devices which are not needed. 2.The controller is off line in APP Troubleshooting method: If the loads exceed the rated current or short circuit, the fuse may blow.
  • Page 12 ●Restrictions and recommendations listed below fully comply to current safety measures. Therefore, we recommend all the users to follow preventive safety rules valid in their country during installation and maintenance of the device. ●The producer takes no responsibility for any possible damage or injury caused by using the product in a way which doesn´t comply to these instructions, mainly by inappropriate installation or by ignoring warnings.

  • Page 13: Weee (Waste Electrical And Electronic Equipment)

    ●Use and store the device in dry places only, in interior or a space protected from weather conditions such as rain, dust or direct sunlight. It is not meant for outdoor use. WEEE – Waste Electrical and Electronic Equipment These products must be recycled properly and should not be disposed as household waste.
  • Page 14 STRONG/Manual_ERC1206.pdf...

Table of Contents