Advertisement
Quick Links
Adapter cable for connection of
a CT-DECT Multi to EOD helmets
(Hazmat)
Instruction Manual
Fig. 1
a
6-pin coupling for connection to the 6-pin plug of
the EOD helmet (Hazmat)
b
Straight cable approx. 100 mm long
c
Housing with matching electronics
d
Straight cable approx. 300 mm long
e
6-pin plug for connection to the 6-pin socket at the
CT-DECT Multi
English
Part No. 09 13 021
Advertisement
Summary of Contents for CeoTronics 09 13 021
- Page 1 Adapter cable for connection of a CT-DECT Multi to EOD helmets (Hazmat) Part No. 09 13 021 Instruction Manual Fig. 1 6-pin coupling for connection to the 6-pin plug of the EOD helmet (Hazmat) Straight cable approx. 100 mm long Housing with matching electronics Straight cable approx.
- Page 2 Purpose The adapter cable Part No. 09 13 021 (see Fig. 1 on the front page) is used for connection of the transmitter/receiver device CT-DECT Multi to the EOD helmet (Hazmat). To avoid damage at the CT-DECT Multi only the EOD helmet (Hazmat) may be connected via the...
- Page 3 CAUTION Notice the following to avoid damage at the CT-DECT Multi: Connect the EOD helmet (Hazmat) only via the adapter cable Part No. 09 13 021 to the CT-DECT Multi, never directly. If you are in the possession of other CT headsets for the CT-DECT Multi, never connect this CT headsets via the adapter cable Part No.
- Page 4 06295 Lutherstadt Eisleben Tel. +34 91 4608250 51 Tel. +49 34776 6149-0 Fax +34 91 4603193 Fax +49 34776 6149-11 E-Mail ventas@ceotronics.es E-Mail ctv.info@ceotronics.com Revision: 00/0610 DOK 1003 Subject to change Copyright © 06/2010 CeoTronics AG, 63322 Rödermark, Germany, Internet www.ceotronics.com...
Need help?
Do you have a question about the 09 13 021 and is the answer not in the manual?
Questions and answers