MOONKI PRO AUDIO MS-HF10000 Quick Start Manual

Thanks for purchase Subwoofer self-powered system.
Before you begin: important information.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A groun-
ding-type plug has two blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10.Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long
periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15.If service instruction in Owner's manual: "CAUTION - THESE SERVICING
INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRONIC SHOCK DO NOT PERFORM ANY
SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUC-
TIONS UNLESS YOU ARE QUALIFIED TO DO SO."
16.To completely disconnect this apparatus from the AC mains, disconnect
the power supply cord plug from the AC receptacle.
17.WARNING - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
18.Do not expose this equipment to dripping or splashing and ensure that no
objects filled with liquids, such as vases, are placed on the equipment.
19. The main plug of the power supply cord shall remain readily operable.
Section 2: Precautions
Watch for these symbols
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "Dangerous Voltage"
within the product's enclosure that may be of sufficient magnitude to constitu-
te a risk of electric shock to persons. The exclamation point within an equilate-
ral triangle is intended to alert the users to the presence of important opera-
ting and maintenance (Servicing) instructions in the literature accompanying
the product.
AC Power requirements
Before plugging the subwoofer into an outlet, ensure that it is able to provide
the appropriate AC power speaker systems have been designed to automati-
cally detect 115V or 230V AC mains voltage 50/60Hz.
BEFORE CONNECTING THE AUDIO EQUIPMENT TO THE MAINS, IT IS MANDA-
TORY TO CHECK THE POSITION OF THE VOLTAGE SELECTOR LOCATED ON
THE BACK OF THE DEVICE. THIS SELECTOR ALLOWS YOU TO ADJUST THE
EQUIPMENT TO OPERATE WITH DIFFERENT VOLTAGES DEPENDING ON THE
AVAILABLE POWER GRID:
• 115V: For electrical networks with a nominal voltage of 100V to 120V.
• 230V: For electrical networks with a nominal voltage of 220V to 240V.
Caution
In compliance with safety agency criteria and proper system operation, it is
critical that the system installer observe all electrical safety practices at all
times and provide proper earth grounding for all AC power connections.
Subwoofer is not intended for fixed installation in outdoor environments.
Moisture can damage the speaker cone and surround, cause corrosion of
electrical contacts, and create an electrical shock hazard. Protect your
speakers from moisture. Avoid exposing the speakers to direct moisture. Any
electrically powered device can produce dangerous shock hazards when wet
or exposed to moisture. Keep speakers out of extended or intense direct
sunlight. The driver's integrity may be affected and finished surfaces will be
degraded by long-term exposure to intense ultraviolet (UV) light.