Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bosch SMS4EMW01E
Summary of Contents for Bosch SMS4EMW01E
- Page 1 Dishwasher SMS4EMW01E [en] Information for Use...
-
Page 2: Table Of Contents
en Table of contents You can find additional information and explanations online. Scan the QR code on the title page. Table of contents Table of contents 1 Safety .......... 3 8.5 Cutlery drawer ...... 2 1 1.1 General information... -
Page 3: Safety
Safety en 14.6 Activating button lock .... 3 1 18 Troubleshooting ...... 3 9 14.7 Deactivate button lock ... 3 1 18.1 Clean wastewater pump .. 4 5 14.8 Interrupting programme .. 3 1 19 Transportation, storage and 14.9 Terminate programme... -
Page 4: Restriction On User Group
en Safety ¡ in closed rooms in the home and with similar applications, e.g.: in canteens in shops, offices and other work environments; in agricultural businesses; use by customers in hotels, motels and other typical home environments; in bed and breakfasts. ¡... -
Page 5: Safe Use
Safety en isolating switch must be integrated into the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. Cutting through the supply hose or immersing the Aqua-Stop valve in water is dangerous. Never immerse the plastic housing in water. - Page 6 en Safety WARNING ‒ Risk of explosion! Adding solvents to the interior of the appliance may cause explo- sions. Never add solvents to the interior of the appliance. Highly caustic alkaline or highly acidic cleaning agents in conjunc- tion with aluminium parts in the interior of the appliance may cause explosions.
-
Page 7: Damaged Appliance
Safety en If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. Never let the power cord come into contact with sharp points or edges. -
Page 8: Preventing Material Damage
en Preventing material damage Children may become trapped in the appliance and suffocate. Use the childproof lock if fitted. Never let children play with or operate the appliance. WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. -
Page 9: Safe Use
Environmental protection and saving energy en should not be installed above or 2.2 Safe use below such appliances. ATTENTION To ensure the safe operation of all Escaping water vapour can damage domestic appliances, continue fol- fitted units. lowing the installation instructions When the programme ends, leave for the dishwasher. -
Page 10: Saving Energy
en Installation and connection 3.2 Saving energy 4 Installation and con- Installation and connection If you follow these instructions, your nection appliance will use less electricity and less water. To ensure proper operation, connect the appliance to the power and water Use the Eco 50° programme. supply correctly. -
Page 11: Drainage Connection
Installation and connection en Check the Scope of supply and Installing the drinking water con- the condition of the appliance. nection Consult the installation instructions Note: If you are replacing the appli- for the installation dimensions re- ance, you must use a new water sup- quired. -
Page 12: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. Rating plate with E number and FD number Page 47 . Rating plate The data you need for Customer Service Page 47 . -
Page 13: Controls
Familiarising yourself with your appliance en Add the special salt to the dispenser for Dispenser for special salt special salt. "Water softening system", Page 22 The lower spray arm washes the tableware in the bottom basket. Lower spray arm If the tableware has not been washed prop- erly, clean the spray arms. - Page 14 en Familiarising yourself with your appliance With some buttons you can perform different functions. 3 4 5 6 7 Page 30 Switching on the appliance Page 32 ON/OFF button and reset Switching off the appliance button Terminating the programme Page 31 Programme buttons Programmes Page 15...
-
Page 15: Programmes
Programmes en The display shows information about the remaining running time or the basic settings. You can change the basic set- Display tings via the display and the setting buttons. "Changing basic settings", Page 34 1 Door handle Open the appliance door. 1 Symbols on the display Symbol... - Page 16 en Programmes energy consumption will increase if the rinse aid system is switched off or if rinse aid needs to be added. The consumption values can be found in the quick reference guide. The con- sumption values relate to normal conditions and a water hardness of 16 - 20 °E.
-
Page 17: Information For Test Institutes
Additional functions en longer soaking and drying times. This The tableware undergoes intermedi- results in optimal consumption val- ate cleaning via cold rinsing. ues. When programmes have been down- loaded and on delivery of the appli- 6.1 Information for test insti- ance, the name of the programme tutes will be displayed in the app. -
Page 18: Features
en Features Symbol Additional func- tion EfficientDry The appliance door opens automatically dur- ing the drying phase. Depending on the basic setting selected, automatic door opening is activated or deac- tivated by the additional function. The addi- tional function button lights up when auto- matic door opening is activated. -
Page 19: Top Basket
Features en 8.1 Top basket Raise or lower the basket evenly to the right level. Arrange cups, glasses and small items of tableware in the top basket. Check that the basket is level on both sides. Release the levers. You can adjust the height of the top The basket clicks into position. -
Page 20: Bottom Basket
en Features 8.3 Bottom basket 8.4 Folding prongs Arrange pans and plates in the bot- Use the folding prongs to position tom basket. tableware securely, e.g. plates. Large plates up to a diameter of You can fold the prongs down to po- 31 cm can be arranged in the bottom sition pans, bowls and glasses basket as shown. -
Page 21: Cutlery Drawer
Before using for the first time en 8.5 Cutlery drawer Arrange cutlery in the cutlery drawer. Arrange cutlery with the points and sharp edges downwards. 8.6 Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery drawer Level Top basket Bottom basket Page 20 1 max. -
Page 22: Water Softening System
en Water softening system To ensure good dishwashing results, 10 Water softening sys- you can treat the water with special Water softening system salt and the water softening system. To avoid damage to the appliance, Hard water leaves limescale on the water with a hardness above 9 °E tableware as well as the washing must be softened. -
Page 23: Special Salt
Water softening system en 10.3 Special salt Add the special salt to the dis- penser. You can use special salt to soften water. Adding special salt If the special salt refill indicator lights up, add special salt to the dispenser for special salt just before the pro- gramme starts. -
Page 24: Regeneration Of The Water
en Rinse aid system The water hardness is 0 - 8 °E. Regeneration of the water You do not need to use special softening system after x salt. washing programmes Press . Additional running time in To open the basic settings, press minutes for 3 seconds. -
Page 25: Setting The Amount Of Rinse
Rinse aid system en Add rinse aid up to the max mark. reduces water marks and im- proves the drying result. To save the settings, press for 3 seconds. The amount of rinse aid to be dis- pensed has been set. 11.3 Switching the rinse aid system off If you find the rinse aid refill indicator... -
Page 26: Detergent
en Detergent is non-critical if you remember the fol- 12 Detergent lowing: Detergent Only choose a programme without 12.1 Suitable detergents PreRinse. Only use detergents that are suitable Do not select timer programming for dishwashers. Both separate and for starting the programme. combined detergents are suitable. The dosage can be adjusted to the For optimum washing and drying res- level of soiling. -
Page 27: Unsuitable Detergents
Detergent en automatically to ensure the best pos- with dry hands and only ever place sible washing and drying result. them in a dry detergent dispenser. Even if the rinse aid and special 12.2 Unsuitable detergents salt refill indicators light up, wash- ing programmes will run properly Do not use detergent which could with combined detergents. -
Page 28: Tableware
en Tableware Close the lid of the detergent dis- let collecting tray and dissolve in penser. the right dosage. In order to en- sure that tablets can dissolve evenly, do not place any other ob- jects in the tablet collecting tray. Tip: If you use powder detergent and select a program with pre-rinse, you can also add a little detergent to the... -
Page 29: Arrange Tableware
Tableware en Cause Recommendation The water temperature of the pro- Select a programme with lower temper- gramme is too high. atures. After the programme has ended, take glassware and cutlery out of the appli- ance without delay. 13.2 Arrange tableware For better washing and drying res- ults, position items with curves or Arrange tableware correctly to optim- recesses at an angle so water can... -
Page 30: Removing Tableware
en Basic operation Do not place small parts in the – 14 Basic operation tablet collecting tray and do not Basic operation block it with tableware so as not 14.1 Switching on the appli- to obstruct the lid of the deter- ance gent dispenser. Press . -
Page 31: Setting Timer Programming
Basic operation en Press the button for the relevant 14.6 Activating button lock additional function. The button lock prevents the appli- "Additional functions", Page 17 ance from being operated accident- The additional function is set and ally or incorrectly while running. the additional function button Press for approx. -
Page 32: Switching Off Appliance
en Basic settings 14.10 Switching off appliance switch the appliance back on, the programme continues automatically. Please note the information on Page 9 . Safe use Press . 15 Basic settings Basic settings Tip: If you press during the wash You can configure the basic settings cycle, the programme currently run- for your appliance to meet your ning will be interrupted. -
Page 33: Remote Start ", Page
Basic settings en Basic setting Display text Selection Description Switch hot water on "A01" or off "A00". Efficient Dry 1 o00 - o02 Activate or deactivate auto- matic opening of the appli- ance door during the drying phase. If the function has been activ- ated, the running time may in- crease. -
Page 34: Changing Basic Settings
en Home Connect Basic setting Display text Selection Description The following settings are possible: With the setting "rc0", the function is permanently de- activated. With the setting "rc1", the function can be selected via the button. "Activating Remote Start ", Page 35 With the setting "rc2", the function is permanently ac- tivated. -
Page 35: Setting Up Home Connect
Home Connect en The Home Connect app guides you Activating Remote Start through the entire login process. Fol- When you have selected "rc1" in the low the instructions in the Home Con- basic settings of this function, activ- nect app to configure the settings. ate the function on your appliance. -
Page 36: Data Protection
en Cleaning and servicing Tip: Deactivate the function a single 17.1 Cleaning the tub time by pressing WARNING Risk of harm to health! 16.4 Data protection Using detergents containing chlorine Please see the information on data may result in harm to health. protection. Never use detergents containing The first time your appliance is re- chlorine. -
Page 37: Machine Care
Tip: You can get our tested and approved Dishwasher Care and Machine Cleaner for Dishwashers online at https://www.bosch-home.com/store or from customer service. Machine Care is a programme which removes various deposits in one washing cycle. -
Page 38: Filter System
en Cleaning and servicing Pour the machine cleaner into the Turn the coarse filter anticlockwise detergent dispenser until it is filled and remove the filter system completely. Check that no foreign objects Do not place any additional ma- fall into the sump. chine cleaner in the appliance in- terior. -
Page 39: Cleaning Spray Arms
This will avoid unneces- sary costs. Tip: You can find further information and explanations on troubleshooting on- line by scanning the QR code on the title page and on our website www.bosch- home.com . - Page 40 en Troubleshooting WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord or the appliance power cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.
- Page 41 Troubleshooting en Fault Cause and troubleshooting E:32-00 will light up The filters in the water connection of the supply or alternately or indicator AquaStop hose are blocked. for water supply lights Switch off the appliance. Pull out the mains plug. Turn off the water tap. Unscrew the water connection.
- Page 42 en Troubleshooting Fault Cause and troubleshooting E:61-03 will light up alternately. Water is not drained. Not an appliance fault. Wastewater pump is blocked or the cover of the wastewater pump is loose. Clean the wastewater pump. "Clean wastewater pump", Page 45 Secure the cover of the wastewater pump so it clicks into position.
- Page 43 Troubleshooting en Fault Cause and troubleshooting All LEDs lit up or Electronics have detected a fault. flashing. Press the main switch button for approx. 4 seconds. "Controls", Page 13 The appliance is reset and restarted. If the problem occurs again: Switch off the appliance. Pull out the mains plug or switch off the fuse in the fuse box.
- Page 44 en Troubleshooting Fault Cause and troubleshooting Remnants of food on Filters are inserted incorrectly and/or not engaged. tableware. Insert the filters properly. "Filter system", Page 38 Engage the filters. Washing programme selected too weak. Select a more intensive washing programme. "Programmes", Page 15 Tableware has been precleaned too intensely.
-
Page 45: Clean Wastewater Pump
Troubleshooting en Fault Cause and troubleshooting Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades are often more severely affected. Use rust-resistant tableware. Cutlery may also rust if washed together with rusting items. Do not wash rusting items. Salt content in washing water is too high. Remove any spilled special salt from the tub. -
Page 46: Transportation, Storage And Disposal
en Transportation, storage and disposal Insert the pump cover and press 19.3 Transporting the appli- down ance To avoid damage to the appliance, empty it before transporting. Note: Always transport the appliance upright to prevent residual water get- ting into the machine's controls and damaging the appliance. -
Page 47: Customer Service
Customer Service en Unplug the appliance from the Nr.), the production number (FD) and mains. the consecutive numbering (Z-Nr.) of Cut through the power cord. your appliance. Dispose of the appliance in an en- You can find the contact details for vironmentally friendly manner. -
Page 48: Technical Specifications
en Technical specifications to our instructions; this also in- If your appliance is fitted with cludes correctly fitting the Aqua- Aqua-Stop, you can in principle Stop extension (genuine access- leave your appliance unattended ory). Our guarantee does not cover during operation and the tap defective supply lines or fittings up turned on afterwards. -
Page 49: Statement Of Compliance For Great Britain
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the essential requirements and other relevant provi- sions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.bosch- home.com among the additional documents on the product page for your ap- pliance. - Page 50 en Declaration of Conformity full model identifier is made up of the The manufacturer, BSH Hausgeräte characters before the slash in the GmbH deems that it has complied product number (E no.) which can be with found on the rating plate. Alternat- provision 5.1-1 of ETSI EN 303 ively, you can also find the model 645 v2.1.1 and, where relevant,...
- Page 52 You'll find it here. Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
Need help?
Do you have a question about the SMS4EMW01E and is the answer not in the manual?
Questions and answers